Rating of the best chisels and center punch for 2020

The chisel and center punch play an important role during construction or renovation work. Typically, these tools are made of high strength carbon steel and have an elongated shank with a sharpened edge. The rating of the best chisels and center punch will help in choosing a worthy tool. All the details are below in the article.

Brief information

Before getting to know the best chisel and center punch manufacturers, you should pay attention to the brand that prefers a high level of quality and reliability. First on the list are FIT and STENLEY - manufacturers specializing in the manufacture of durable and comfortable tools. The material used during the casting plays a special role in the production of chisels and cores. These manufacturers use high-carbon steel, which undergoes special heat treatments. Ultimately, the consumer gets a reliable tool that can withstand huge loads over a long period of time.

It should be noted that the leading positions in the world market for the production of the described tools are occupied by Germany, Great Britain, China and the USA. These are the countries that produce the best performing chisels and center punch with a long service life. In the event that a consumer needs a tool that is designed for home use, one should look at the companies MATRIX and TOPEX. Chisels from these manufacturers are excellent for light loads and are low cost.

Having decided with the manufacturer, you need to think about the purpose of the tool, and then compare the characteristics of the selected models with possible loads. The average cost of decent chisels and center punch is 800-1500 rubles. Such a tool will certainly last a long time and bring considerable benefit.

Tool cost

Review of the best hand chisels

The chisel category is considered cheaper and more affordable and is best suited for small workshops as well as home use. The principle of working with such chisels is simple - you need to hit with a hammer on the upper surface of the tool so that it cuts the surface to be treated. The advantage of such equipment is that it does not need electricity and is capable of functioning in all planes. Chisels of this group easily cope with the processing of light metal sheets, cutting out workpieces, cleaning welded seams, chipping channels, gouging bricks, stones, etc. The disadvantage is that a hand tool always takes a lot of energy, so it won't work for a long time.

Stanley FatMax 4-18-332 - metal machining

The American manufacturer FatMax has developed an excellent cutting tool for metal materials, which ranks first on this list. Despite the fact that FatMax chisels and center punches are produced in China, American equipment and all brand standards are used during the production process. This inventory has been repeatedly tested in the CIS and Europe, therefore, during a purchase in a store, the consumer has the right to familiarize himself with the relevant certificates. The distribution of the goods is carried out by the dealer network, which in turn guarantees the exclusion of counterfeits. The main purpose of the FatMax 4-18-332 is to work on production and construction sites, taking into account daily use. The cutting edge of the chisel has a width of 25 mm, this parameter provides a convenient and easy cutting of scale, seams, faces. The base of the tool is a rigid hexagon, the length of which is 300 mm. A distinctive feature of a chisel is the ability to penetrate a 5 mm metal sheet with two blows.

The expert opinion states that this chisel can handle cutting and machining of alloy steels, carbon steels, copper, aluminum, brass, cast iron, and welds with ease. FatMax is an indispensable tool during demolition work when you need to cut bolts, nuts or rivets. A wide rubber pad, located around the shock penny, acts as a protective element for the master's hand.

• Clean and seamless chisel processing;
• Impressive cutting edge width;
• Long chisel base;
• The presence of a protective element;
• Thick base coat;
• Long service life;
• Comfortable and reliable handle;
• Possibility of punching 5 mm sheet;
• Processing of most types of metallic materials.

• Relatively fast wear of the impact nickle;
• Heavy tool weight - 800 grams;
• Too high cost - 900 rubles.

FIT 46722 - concrete processing

This tool is produced by a young Canadian company that has located its production sites in China. This move significantly affected the cost of production, otherwise the price of the chisel would have been three times higher. The material for the hexagonal base of the chisel was tool steel, equipped with a number of increased impact-resistant characteristics. The working handle is completely covered with a thick layer of durable rubber, and a wide penny with a flat surface acts as a protective element in the tool. The thickness of the cutting edge is 22 mm, which is ideal for chasing channels for electrical networks. The main part of the chisel is 250 mm long.

Craftsmen emphasize FIT 46722 as a tool that easily copes with dismantling brick structures or chipping small channels in concrete surfaces. By far the most affordable hand chisel available for both industrial and home use. Such inventory easily knocks down old bolts and nuts, which only emphasizes the need for a chisel in any home.

• Comfortable and reliable rubberized handle;
• The best price indicator among all the chisels in the rating is 250 rubles;
• Penetration of concrete of any density;
• Light enough (450 grams) for easy use on walls and ceilings;
• Increased impact resistance of a nickle;
• The presence of a protective element.

• Softness of the protective lining, blows easily penetrate the protection;
• Designed exclusively for concrete structures, when working with metal, the edge instantly becomes dull.

TOPEX 03A149 - stone processing

The next tool in this ranking is the Polish TOPEX chisel, which is produced in the country of origin. The base material of the chisel is high-carbon steel, making it easy to crush concrete, stone, brick and plaster.The cutting edge of the chisel has a thickness of 19 mm, and the narrow surface of the element helps to improve the immersion of the tool in the surface of the material being processed. Also, the tool is great for demolition work. TOPEX is in great demand, because the working handle is equipped with a thick rubber layer and has special protrusions for the finger, making the production process much easier. The master is protected by a rubber pad, which is conveniently placed around the shock penny. The appearance of the chisel is just a delight, and the brand name on each model guarantees the avoidance of fakes.

The TOPEX chisel is a prime example of the ideal quality-price ratio. The tool is durable, reliable, convenient and relatively cheap. It does an excellent job of dismantling old skirting boards, door and window openings thanks to its long 400 mm bar. The element has a significant effect on a thick layer of walls, while not injuring the hands of the master

• Impressive rod length - 400 mm;
• Ergonomic and comfortable handle;
• Very light weight - 350 grams;
• Low cost - 300 rubles.
• Durable chisel alloy;
• The presence of a protective cover.

• Small width of the cutting tool;
• Long-term installation in doorways due to the considerable length of the rod.

Review of the best chisels for rock drills

Such a tool, as a rule, is used in conjunction with drilling and percussion machines. The essence of the work is simple, the chisel is installed in the chuck of the perforator, after which the gearbox starts to spin the tool with the help of the bearing. Using such a system, the master will be able to quickly dismantle the masonry, drill large holes, gouge small channels and remove the outer finish layer. The choice of chisel length is carried out depending on the thickness of the walls. However, it is worth remembering that such a tool can only be used in conjunction with a puncher. Metal surface treatment is not carried out.

SDS MAX MATRIX 70343

This chisel is manufactured by a German company that has located its production workshops in China. Hexagonal 18 mm base has a spatula shape with a splashed end.

The cutting edge of the tool is ideal for removing the outer layer, as well as for deep immersion in the work surface. The element width is 25 mm. The SDS MAX MATRIX 70343 is considered the longest chisel in the ranking, as its value is equal to 600 mm. The main calculation is for the shock mode without rotation. The tool has a specially designed shank that fits only construction rock drills.

As you might expect, the chisel's strongest and distinctive feature is its length. This is one of the largest chisels, which is perfect for punching walls with a width of 500 mm, for laying pipes, shaping ventilation ducts, etc. The tool is strong enough and does not need regular sharpening.

• The longest of all chisels is 600 mm;
• Decent cutting edge width - 25 mm;
• Easy and quick installation of the chisel into the chuck;
• A protective element has been installed to prevent spontaneous slipping of the tool;
• Does not require constant regrinding.
• Low cost of inventory - 300 rubles.

• Huge chisel weight - 1.2 kg;
• The instrument performs only percussion actions, rotational ones are not supported;
• Fits only in large rock drills.

MATRIX 70311

Another German instrument made in Europe. The inventory has remarkable parameters: the cross section of the rod is 14 mm, the width of the cutting edge is 40 mm, and the length of the base is 400 mm. Thanks to these characteristics, the chisel is considered an excellent option for work at low heights, without the use of ladders and stepladders. Mainly users praise the tool for its sharp and effective edge. This result is achieved thanks to the material of the chisel, which served as a hardened alloy steel.It is worth paying attention to the angle of the sharpened edge. The fact is that the developers worked on it for a long time and selected it through regular experiments. The shank locking groove has a special recess that prevents the tool from accidentally slipping out of the chuck.

This chisel is distinguished by its high speed of removal of the external finish due to its wide cutting edge. The flat element of the tool instantly catches the top layer of the finish and removes it from the treated surface. The tool is also convenient due to its light weight and compatibility with small rotary hammers working with SDS-plus chuck.

• Quite low weight - 450 grams;
• Perfectly sharpened edge;
• Supports small and medium rock drills with SDS-plus;
• Durable and wear-resistant chisel material that has undergone special heat treatment;
• Manufactured in Germany;
• Large edge width 40 mm.

• The niche in the masonry is heavily hollowed out;
• Often amenable to mechanical deformation due to prolonged loads.

Review of the best center punch

This tool is widely used in the field of measuring and marking work necessary to correct the installation of the drill. The center punch is a cylindrical rod, one end of which is sharpened at an angle of 100 degrees. On the other hand, there is a striker, which will be hit with a hammer. The material is mainly high-strength heat-treated steel.

KWB 9209-90

Kerner of German production, which is manufactured in China. It is a compact cylindrical rod specialized in marking the surface of metal structures. This tool is made from specially hardened alloy steel with a carbide tip. The master is protected by the grooved surface of the rod, thanks to which the rod does not slip out of the hands. The rod is 130mm long and 70mm wide.

• Durable impact element;
• The presence of a corrugated surface;
• The strength of the working part;
• Lightweight - 120 grams.

• High cost - 500 rubles.

STANLEY 0-58-120

The American center punch STANLEY 0-58-120 is made in France and has a wide application in the field of drawing indentations and markings for subsequent drilling. The tool shank is milled and the material is hardened and lowered steel, hardened. A distinctive feature of the corer is increased resistance to impact work. The striker of the rod has a square shape, which makes it easier to hit. The entire surface of the inventory is covered with a layer of varnish, which protects against corrosion. The rod is 150 mm long and 72 mm wide.

• Milled tool body;
• Center punch varnish;
• Convenient tool shape;
• Relatively low cost - 260 rubles;
• Increased wear resistance.

• Heavy weight - 400 grams.

It is worth remembering that this rating is strictly subjective and is not considered a buying guide or advertisement. Always consult with the seller before purchasing such items.