Rating of the best motor pumps for water for 2020

Having a summer cottage or a house in the private sector, we get a large number of positive moments. For example, the opportunity to have your own vegetable garden, enjoy the fresh air, barbecue on weekends. But in parallel with this, there are disadvantages, the main one of which is water, or rather its absence. Central water supply is not available everywhere, and the purity of the water sometimes leaves much to be desired. You can cope with this problem. Here a motor-pump for water will come to the rescue. This device is a liquid pumping pump. And its work is based on the internal combustion engine. Therefore, it will be possible to get water regardless of the power source.

What is a motor pump?

The motor pump is a pump with a metal frame that runs on gasoline or diesel. You can also find electric or gas models.

Electric pumps are not widely used, since the range of their action is not great, and there may also be problems with the availability of electricity. Such device options are usually used for pumping liquid indoors, where exhaust gases cannot be allowed.

In the design of any motor pump, two short tubes are provided, where the sleeves are connected. Liquid is pumped into one sleeve, and discharged from the other. It is also worth noting a metal frame or frame that protects the device from vibration during operation.

During operation of the device, dirty water enters the inner chamber through the suction hose. In this chamber, the wheel rotates due to the work of the motor. At this moment, the centrifugal force begins to act on the liquid, increasing its pressure and throwing it towards the walls of the inner chamber. As a consequence, the liquid is pushed out through the second sleeve.

Types of motor pumps for water

The main distinguishing feature of this device is the type of engine. For short-term work and relatively infrequent use, gasoline motor pumps are used. Such units can be used in all weather conditions, and even at negative temperatures. If a gasoline motor pump has a high head, then it can even be used to extinguish a fire. Operation of such equipment does not require additional knowledge and skills. But do not forget that it must be turned on at least once a month. Otherwise, it will be necessary to completely change the fuel, otherwise the unit may not start working.

Diesel devices are more efficient and more economical to use. Due to this quality, they can be used for a longer period of time. It is also worth noting that they can be on hold for up to six months. At the same time, as in gasoline engines, they do not need to be switched on periodically, or the fuel must be replaced. But diesel units are usually operated only in temperature regimes from +5 to +30 degrees. It will not work with them in the cold season.Also, during their operation, there will be a large output of exhaust gases, which can adversely affect health.

In addition to the type of engine, these devices differ in the type of tasks being solved. It depends on the type of fluid and how dirty it is. To work with pumping clean water, units with a small capacity are used with a two-stroke engine. They have a fine mesh filter and are mobile. High-pressure motor pumps are also used for water with little pollution or, if it is necessary to supply it to high floors or long distances. This option is very heavy, so it does not have much mobility. If it is necessary to pump over heavily contaminated driving or rather thick liquid, devices with a diaphragm motor are used. This variant is very powerful and very heavy.

Criterias of choice

Before buying this unit for working with water, you should decide on the tasks that you are going to solve with the help of a motor pump. Since the device is responsible for pumping liquid, attention must be paid to performance. Those. how much liquid the unit can pump in one minute. When using a device for watering a garden, about 200 liters per minute will be enough. If the motor pump will be used to collect water from flooded rooms or a pool, then a capacity of up to 1000 liters per minute is suitable here. For use in the construction field or pumping water from reservoirs, you should take a motor pump with a capacity of at least 1500 liters per minute. The diameter of the nozzles where the sleeve is connected also affects the performance of the device. The larger the diameter, the higher the faster the process will proceed.

The next criterion that requires attention is pressure. This parameter can also be called the height of the water column. It should be borne in mind that 1 meter in height will be 10 times higher than this value in a horizontal position. For example, if the head is 10 meters, then it will be able to supply water at a distance of about 100 meters.

The suction depth is also an important parameter, given that the device itself will be on the surface. If the motor pump is used for domestic purposes, 7 or 9 meters will be enough.

The motor power of these units ranges from 2 to 12 kW. If the device is necessary for watering, a small motor power will be enough. If you plan to pump out thick and viscous liquids, you should purchase models with a high motor power.

Pay attention to the amount of fuel consumed per hour of operation. For devices with high performance and high motor power, this parameter will be higher. It is usually considered normal for a household unit to consume about one liter of fuel per hour.

The best motor pumps for water

Hummer MTP165

Such an apparatus for pumping water will be a useful acquisition for people who have a summer cottage or a vegetable garden. Hummer MTP165 works with clean and slightly contaminated water. Suitable for watering a vegetable garden or filling / draining a pool.

With the Hummer MTP165 it is possible to distill up to 7800 liters per hour. The suction depth is 8 meters, while its head is 30 meters in height. This will be enough to provide water for a house of several floors.

The motor pump has a reliable and sturdy metal frame, which is installed on rubberized legs. Thanks to this, unnecessary vibration will not be created during operation, and the device will stand steadily throughout the operation. The main parts of "Hummer MTP165" are made of metal, which does not corrode, and is also resistant to mechanical stress. An air filter is provided to protect the mechanism from dust or solid particles. Thanks to the modern ventilation system, there is no need to worry about the unit overheating.

The Hummer MTP165 has a two-stroke engine with a volume of 43 cc. the volume of the fuel tank is equal to one liter. This device works from a mixture of gasoline and two-stroke oil. The proportions should be 25 to 1. The kit comes with a canister to prepare the necessary fuel mixture.

The average cost is 8400 rubles.

• Light weight;
• Has a good water pressure;
• Convenient management;
• The best option for watering the garden.

• For operation, it is necessary to prepare a mixture of gasoline and oil.

Champion GP27-II

Champion GP27-II is a household appliance that is lightweight and compact. But despite this, it has excellent performance.

"Champion GP27-II" has a two-stroke engine with a volume of 32.6 cm3, while its power is equal to 900 watts. It is worth noting that the maximum productivity of the device is 133 l / min, while the head height will be 30 m. Therefore, such a unit can be easily used both for irrigation and for filling large containers with water.

The construction of "Champion GP27-II" has no frame; there are metal legs for the stability of the apparatus. It also does not make much noise during operation and has a vibration damping system. Thanks to this, you can safely be near the device during operation and not experience discomfort.

The size of "Champion GP27-II" is 37 * 39 * 28 cm, and weight - 7 kg. In this case, the volume of the fuel tank is 0.95 liters.

The average cost is 6,400 rubles.

• Works silently and has a vibration damping system;
• Compact size and light weight;
• Good performance for household needs.

• It has no frame, it is installed only on the legs.

Huter MP-50

This motor-pump is designed to pump clean or water with a small amount of contamination. The Huter MP-50 is powered by a 5.5 hp gasoline engine and a centrifugal pump. With its help, up to 600 liters of water can be distilled in one minute. Moreover, the suction depth can be up to 8 meters, and the head height - 32 meters.

It should be noted that the engine of this model is a four-stroke and has one cylinder, while it has an overhead valve arrangement. The tank can hold almost 4 liters of gasoline, while the device has an economical fuel consumption, which together gives a long continuous operation of the device. "Huter MP-50" has a metal frame, which gives stability during operation, protects against damage.

The device is started using a manual starter, which is a lot of work. Fill the suction line and pump with water before starting work. This is done using a special hole at the top of the unit. If the device is operated "idle", it can lead to damage. Also, in order to prevent the device from leaving the operating state, a filter is installed at the inlet. Thanks to the filter, solid particles do not enter the motor pump.

The average cost is 8600 rubles.

• High performance;
• Made from quality materials;
• Durability;
• The device is stable during operation;
• Doesn't make much noise;
• Has a good lifting height;
• Popular brand.

• Not found.

Zitrec PGT700

This motor pump from the Czech brand "Zitrec" is designed for pumping water with heavy contamination. However, the particle diameter should not exceed 20 mm. Zitrec PGT700 is suitable both for work in rural areas and at a construction site or accident site.

The Zitrec PGT700 has a 163 cc four-stroke engine with an output of 4 kW. The device at maximum load can pump 700 liters in one minute. It should be noted that the suction depth is 7 meters and the head is 23 m.

The size of "Zitrec PGT700" is 41 * 38 * 48 cm, the weight of the device is 23 kg. The volume of the tank is 3.6 liters.

The average cost is 10,000 rubles.

• Good performance;
• Four-stroke engine;
• Mobility;
• Czech brand.

• Many users complain about the increased noise during the operation of the device.

Carver CGP6080

With the "Carver CGP6080" you can pump clean fresh water from reservoirs, wells, flooded premises. The device is not intended for use with contaminated liquids containing particles larger than 5 mm.Also, do not pump seawater, flammable liquids or liquid food. Although the device works with clean water, this water should not be supplied for drinking, as it does not pass sufficient filtration and can be harmful to health.

"Carver CGP6080" has a gasoline four-stroke engine with a volume of 210 cc. the volume of the fuel tank is designed for 3.6 liters, this will be enough for two hours of continuous operation. After this device should "rest" for about 20 minutes. Refueling should be carried out only after the engine has completely cooled down. "Carver CGP6080" has a capacity of 1000 l / min, while the suction depth is 7 m, and the head - 30 m. Operation is allowed at temperatures from +5 to +40 degrees.

The size of "Carver CGP6080" is 52 * 38 * 45 cm, and the weight is 25 kg.

The average cost is 7,500 rubles.

• Good pressure;
• Ability to work for 2 hours without refueling;
• Price;
• Good performance.

• Not.

Huter MPD-80

The Huter MPD-80 is designed for clean and polluted water. With this device, you can drain a pool, flooded room or small body of water in a short time. In addition, this motor pump can be used as the basis for an irrigation system on farm plots.

The Huter MPD-80 has a single cylinder, four-stroke gasoline engine with a displacement of 208 cc. The work can be started with a manual starter. This model has a self-priming pump that does not require preliminary filling of water. The maximum pump performance is 3600 rpm, under these conditions the Huter MPD-80 can pump up to 900 liters of water per minute. The device has a maximum suction depth of 8 meters and a maximum head of 30 meters. The case can be easily opened without additional tools for cleaning it from dirt. Check the engine oil level every time before starting operation. If it is not enough, it will lead to premature failure. After starting the engine, it is necessary to warm it up for 1 minute.

The size of "Huter MPD-80" is 45 * 46 * 59 cm, and the weight is about 30 kg.

The average cost is 15,500 rubles.

• Sturdy frame;
• Suitable for clean and polluted water;
• Simple operation;
• Does not require preliminary filling of water.

• Not.

Conclusion

You should purchase this device for pumping water in trusted stores. This way you will not encounter a fake or get a poor quality product. Reliable manufacturers give a 12 month warranty for this device. And with proper operation, compliance with all the rules, the motor pump will serve you for more than one year. The main thing is to correctly determine the purpose of the acquisition and the performance of the unit before buying.