Ranking of the best bike pumps in 2020

A good pump for any cyclist is a type of car pump that is specifically designed to inflate tires in bicycles. There are many types of such devices for pumping air in bicycles. In order to figure out which one is better, a ranking of the best bicycle pumps in 2020 was compiled.

How to choose a pump

Such bicycle equipment must be suitable for all types of nipples, as well as be practical and easy to use. It must also be equipped with a pressure gauge. Thanks to the use of modern polymeric materials and metal alloys, manufacturers make the device designed for pumping air in wheels more durable. A bicycle pump most often has a muscle-driven mechanism. To avoid mistakes in choosing, it is necessary to carefully study the features of the mechanism of each type of bicycle pump.

Features of Bicycle Pump Nipples

There are three types of nipples for bicycle pumps. For example, for automobile - only 1. Each type of nipple has its own name:

Dunlop

This type of nipple is the most common in the Netherlands, Austria and Germany. It is intended for city and tourist bikes. Used in all bicycles until 1980.

Dunlop nipple adapters. It is somewhat difficult to inflate a bicycle tube with this type of nipple, since the adapters for this type of nipple are more suitable for car tires. Any bicycle tire can be inflated through a hose with a pressure gauge from the compressor. But if you need to pump a chamber with a Danpole type nipple, then you need to connect a special adapter called a Schrader pump.

Car

Refers to the universal types of nipples. Can be used by both motorists and cyclists. It is called Schroeder-nipple or American. It is unpretentious to moisture and dust. The head of each type of nipple is protected by a cap, but the automotive one will still be more reliable. The cost of such nipples fluctuates in the middle price range. They are reliable and durable.

Presta

This type is adapted for sports bicycles. This ultra light nipple is installed on tires without tubes. Presta is an expensive nipple. 6 mm - hole diameter. To pump such a nipple, you need to connect a bicycle pump or put an adapter on a car one. Care should be taken to inflate the wheel as the nipple is fragile.Also, Prest has a rather fragile spool.

Types of pumps

Portable pump

For example, if you use a mountain bike, then any bicycle pump will do, the main thing is that it can pump the wheel to the required hardness. In the event of a puncture, this will help you get home. A pressure gauge would also be helpful, but it is not required for mountain bikes. Another name for a portable pump is manual.

Hand pumps are divided into two types:

• With a hose;
• With integrated head.

Integration pumps have a special insert, thanks to which the nipple can be sunk in a circle. Thanks to the rubber tab, the air is inflated much more efficiently. Such a pump has a diameter of 8 inches, and a pump with a hose - as many as 18. However, the inconvenience is that the pump with an integrated head must be held with your free hand, because there is a risk of pulling out the nipple.

It is easy to fit into a cyclist's briefcase or into a bike basket if available.

Pumps of this type are very lightweight and compact. True, it takes a lot of effort to inflate the wheel.

Floor pump

They belong to the category of universal automotive pumps. The main emphasis during the operation of this unit is directed to the floor. To operate the pump, you must press with your feet on a special base. The hose is screwed to the chamber through a one-way valve. This type is the most common. These devices are considered budget bike accessories. It is convenient and compact. For convenience, you can easily grasp the device with both hands. This type of pump is made of plastic materials or aluminum.

Specifications:

• Most often, all pump elements are made of special metal, for example, steel;
• Large volume cylinder. This contributes to the rapid inflation of the wheels;
• Durable hose is made for all possible types of nipples;
• The pump stop is directed to the floor, which makes it stable;
• Ergonomic handle for comfortable work;
• A pressure gauge is installed to monitor the pressure.

From 500 to 680 millimeters - the height of the floor pump. It weighs from 1 to 2 kg and has a diameter of 30 to 50 millimeters. This type can create pressures up to 12 bar. Body weight and arm muscle strength make pump handling easier. The tire can be inflated in 1-2 minutes.

Compressor pump with accumulator

These compressors are not designed to operate the machine's battery or to be powered from an outlet. They are useful if there is an urgent need to inflate the wheels in many bicycles at once. But if you need to pump no more than five bicycle cars, then you can get by with a hand pump. But on long trips, he is irreplaceable. A good option would be a Berkut pump.

Portable pump models

SKS Injex T-Zoom

It can inflate tires in 5 minutes. This ultra-light pump weighs just 182 grams. It can generate pressures up to 10 bar. The length is 256 millimeters. A comfortable pistol grip provides a secure grip. The telescopic arrangement of the cylinders makes the work more efficient than other types. Such a convenient pump costs 1000 rubles.

• Easy;
• Convenient;
• Compact;
• You can take on a long trip.

• Not detected.

BETO MP-036

The piston mechanism, which is capable of performing double action, is the main feature of this pump. The piston moves back and forth. These simple movements help to inflate the tires more efficiently. There are such special devices here:

• Bleed button for more efficient tire inflation;
• A hose with a special adapter makes it possible to adapt to a wheel with any nipple;
• A full-fledged pressure gauge allows you to quickly and accurately measure tire pressure so that there is no pumping.

Such a device weighs 200 grams, and the length is 220 mm. Thanks to the hose, the nipple cannot be torn off. Also, the presence of a hose makes air pumping more comfortable. It costs 1600 rubles.

• Compact;
• Easy;
• Convenient;
• Has additional functions.

• Not detected.

Cyclotech pumps

This bike stock is made of plastic. Cyclotech's super lightweight plastic pumps are very popular. They belong to the group of universal ones. They weigh no more than 100 grams. Thanks to composite materials, they are in no way inferior in strength to metal pumps. They are much cheaper than pumps from other companies - an average of 700 rubles.

• Cheap;
• Practical;
• Super lungs.

• Not detected.

Popular models of floor compressor for inflating bicycle tires

Topeak JoeBlow Max HP

An excellent floor pump that is equipped with a quality pressure gauge. Here you need to pump up the wheels with your hands. Made of good durable steel. The handle with a comfortable grip makes the work as comfortable as possible.

Specifications:

• Weighs 1.36 kilograms;
• 30 millimeters - cylinder diameter;
• 680 mm - height;
• Hose length - 90 cm;
• There are adapters for all types of nipples.

Also, if desired and necessary, you can inflate air mattresses and balls. Price - 1700 rubles.

• Easy;
• Universal;
• Relatively inexpensive.

• It is inconvenient for people with small stature to use.

Stels ZF-037

Bicycle pumps of this model are manufactured by Velothromix. There is a measuring scale and a pressure gauge. 11 bar - maximum pressure. Made from heavy duty aluminum alloy. It costs 1,500 rubles.

Specifications:

• Weighs 1 kilogram;
• 38 mm - cylinder diameter;
• 530 mm - height.

• Convenient;
• Compact;
• Easy;
• Suitable for all types of nipples;
• Practical.

• Not detected.

Battery powered bike compressors

Berkut Specialist VL-1000

To start inflating the tire, you just have to press the special start button. It can be securely attached to the frame. The bright LED light allows the tires to be inflated at night. It gets infected like a regular mobile phone. A high-precision pressure gauge allows you to determine without error how much load is required to fully and safely inflate a bicycle tire. It costs 4000 rubles.

Specifications:

• Thanks to the presence of a lithium-ion battery, it can be charged even on the road from a power bank if necessary;
• Weighs 450 grams;
• 8 bar pressure;
• 10 liters of air per minute (productivity);
• 7-8 minutes can work without interruption.

• Light enough;
• Has many functions;
• Reliable;
• Suitable for long journeys.
• Powerful.

• It is very expensive.

Bicycle pumps - other models

BBB Traveler trekking

Such a compact unit costs 2,800 rubles. Power 8 bar. Weighs 248 grams. T-handle and built-in pressure gauge for comfortable and convenient work related to the inflation of bicycle tires. Also included is a frame mount. Made of aluminum.

• Compact;
• Robust body;
• Convenient;
• Inflates the wheels very quickly;
• Multifunctional;
• There are additional devices;
• There is a frame mount;
• A light weight.

• Expensive.

Giyo GS-02D

This model is made of high strength aluminum. The rear shock absorbers can be inflated due to the high pressure of the unit. The tube is small here, so the tires of the bike will be inflated for longer than a conventional bike pump. Such a device costs 1,500 rubles.

• Easy;
• Lasting;
• There is a pressure indicator;
• Creates high pressure.

• Long wheel pumping;
• Complex transportation of the device;
• Weak functionality.

CrankPump CO2

This gas pump is the most functional device among the pumps of this type. You can inflate your tires with an ultra-light gas cartridge. The T-handle allows the pump to be attached to the bike as firmly as possible. The built-in pressure gauge allows you to determine at what pressure the tires are inflated. Buying this pump is an expensive pleasure, since you also need to purchase a gas cylinder. Such a pump is enough for only 1-2 pumping of the wheels. This type belongs to the category of pneumatic pumps.Costs approximately $ 20.

Technical characteristics and parameters of the device:

• There is a double pumping system;
• Gas supply is automatically regulated;
• 120 psi is the pressure of the device;
• Made of plastic;
• Weighs 125 grams.

• Compact;
• Easy.

• Refers to expensive options.

SKS BANDIT

It is a lightweight pump that is dustproof. Refers to telescopic bicycle pumps. It costs 500 rubles.

Specifications:

• Made of aluminum;
• The frame mount serves as a convenient attachment for the pump;
• Weighs 83 grams;
• Has a length of 225 millimeters.

• Super lightweight;
• Cheap;
• Multifunctional;
• Effective;
• Compact;
• Has a large working chamber.

• Not detected

Many cyclists want a good portable pump. Now in the world there is a wide range of different models, both cheap and expensive. This article compiles a ranking of the best bike pumps in 2020.