Metabo's Best Drills Ranking 2020

An electric drill is a tool that is present in the home of every self-respecting owner. The drill allows you to solve many different problems: drilling holes in almost any material, tightening all kinds of fasteners, mixing solutions and much more. A modern drill is a technically complex structure with a large number of characteristics. In the selection of the right tool from the manufacturer Metabo, our rating will help you understand as much as possible.

Types of electric drills

Depending on the purpose, it is customary to use the following drill classification:

• unstressed;
• drums;
• drill mixers;
• corner;
• drills and screwdrivers.

Each of these types has its own functionality. Impact and non-impact models differ in the way of drilling. In percussion types, in addition to the standard rotary, the drill makes a forward stroke. This is essential when drilling hard materials such as concrete or brick. Hammerless drills are used to work with metal or wood products. The impact type is considered a versatile option. These models are equipped with a switch that easily changes the operating mode.

The main purpose of drill-mixers is mixing liquid substances - paints, plaster or cement mortars, etc. However, one should not forget about their drilling capabilities. Low-speed mixers can be used to prepare holes for pins for a bar. For convenience, these models are equipped with an additional handle for holding the drill in one position for a long time.

Angle drills are used when drilling in limited space. The electric drill gearbox is located at right angles to the housing. These machines are lightweight and compact, very necessary when working in hard-to-reach places.

Many are interested in the question: what is the difference between a screwdriver and a drill? The introduction on the market of a universal tool combining the functions of these two different devices has greatly simplified the performance of everyday tasks. The drill-driver is designed for screwing fasteners as well as for drilling small holes. Almost all models are equipped with a reverse function and a change in the force and speed of rotation.

Drills for engraving (or mini drills) can be considered a separate type. Their range of applications is very limited - they are used for grinding and polishing smooth surfaces.

By the type of power source used, drills are classified into cordless and mains. Cordless drills are used in places where there is no constant power supply from the mains, as well as in cases of frequent movements. They, as a rule, have less power than network ones.In addition, such models require constant recharging, and the high price of autonomous batteries often scares off potential buyers. Of the minuses of the network options for drills, it is worth highlighting the high sensitivity to voltage drops in the network.

How to choose an electric drill in 2020?

Choosing a drill for domestic or professional purposes is quite difficult. Here you need to focus not only on how much the selected tool costs, but also on a number of selection criteria that determine the need for a purchase. So, what to look for when choosing the best electric drill:

1. The purpose of the drill.

First of all, you need to decide - for what purposes do you need a tool? If it is enough to have a drill only for small domestic purposes, the choice will be significantly different from the cases when you need to drill holes in durable materials. For some, it is important that the drill is suitable for driving screws, and someone is going to use it as a mixer. It is also necessary to immediately determine the type of power supply of the drill - power supply from the power cord or from the battery.

2. Drill power.

Drills typically range in power from 250 (light household models) to 1800 watts (professional). This characteristic is directly related to the torque of the machine and the ability to process various materials. For household work, a power range of 600-900 watts is recommended. It should be borne in mind that with increasing power, as a rule, the weight of the tool increases.

3. Maximum speed / impact.

Another important parameter when choosing a drill. The higher the speed, the smoother the hole can be drilled. The maximum rotational speed is usually in the range of 2000-4000 rpm. Drills with speed control are very popular. some operations are best performed at reduced processing speed.

4. Maximum drilling diameter.

The diameter of the maximum hole is different for three different materials - metal, wood and concrete (for models with impact mechanism - additionally brick and stone).

5. Chuck type.

There are drills with two types of cartridges: keyless and key. The quick-release version is used for easy drill changes during the drilling process - they do not need special removal tools. True, they fail much more often. The key type chuck is unclenched using a special device - a key. The fastening in this case is much more reliable, although you have to worry about the safety of the key. Another important factor is the diameter of the fit or the maximum size of the drill. It can vary from 10 to 16 mm.

6. Reverse capability.

A very important point for drills with the function of a screwdriver is that it is convenient to unscrew the fasteners with them. In addition, a reversible tool has the advantage of being able to pull a jammed drill out of the hole.

7. Additional functions.

When choosing a drill, you should also pay attention to the presence of additional functionality:

• a soft start mechanism (to avoid jerking when starting drilling);
• fixing the button (for the convenience of fixing the tool in the hand, as well as using a drill to work in the drill stand);
• anti-vibration system;
• electronic speed control, etc.

8. Equipment.

A nice bonus to the purchase of an electric drill will be the presence of an additional handle, a dust collector, a hole depth limiter, a magnetic bit holder on the body and a reliable storage case.

An important factor, in addition to technical characteristics, is its maximum convenience. Before buying it, you must definitely hold it in your hand to assess its weight, practicality of the handle and buttons.

When looking for an answer to a rather difficult question, which tool is better to buy, it is important to be guided not only by price and the best manufacturers, but also by the factors indicated above. Mistakes in the choice of a drill can lead to the fact that it will not be used to its full extent, or worse, it will soon need to be replaced.

Metabo is one of the most popular tool manufacturers

Which manufacturer's electric drill is better? According to buyers, Metabo power tools are among the top most bought in Russia. Metabowerke has almost a century of history and is a pioneer in the production of various types of drills. Thus, Metabo pioneered the production of electric drills and hammer drills.

The company continues to focus on the production of drilling tools to this day. Thanks to the vast experience gained, the German company produces almost flawless options with excellent ergonomics and reliability, while not at the very high cost. The company is constantly improving its technical ideas and adding new, badly needed functionality. This explains the rather high popularity of the Metabo electric drill model.

German manufacturers offer a wide range of drills for every taste. These are simple budget drills for processing common materials, and percussion models for more durable ones with the ability to drill holes up to 20 mm, and drills with mixing functions or a screwdriver. The power of Metabo electric drills is in the range from 400 to 1800 W, the maximum speed is up to 4600 rpm. One of the main advantages of Metabo tools is their durability - if you need a tool for a long period, then this is undoubtedly the best choice.

Below is a rating of quality Metabo drills in various categories with a description of the main characteristics, as well as the advantages and disadvantages of each model.

The most popular models of Metabo hammer drills

	Metabo BE 650 (BZP)	Metabo BE 850-2 (BZP)	Metabo BEV 1300-2 (SGP)	Metabo WBE 700
Power, W	650	850	1300	705
Number of revolutions, rpm	2800	3100	3100	2050
Cartridge	quick-clamping	quick-clamping	key	key
Weight, kg	1.8	2.6	2.7	1.8
Average price, p	4200-5300	9200-12100	12200-13400	18100-20500

Metabo BE 650 (BZP)

An economical model with a keyless chuck and a power of 650 W and a maximum speed of up to 2800 rpm for small household jobs. A real top-seller in its segment. Ideal for working with metal or wood. An excellent option for use in a carpentry workshop (maximum drilling diameter in wood - 30 mm). Equipped with reverse functions, spindle locking and Variospeed electronic speed control. Lightweight (weight 1.8 kg), powered by a 2.55 meter mains cable.

• convenient keyless metal chuck;
• lightweight and easy to work with;
• durability.

• low power;
• no drilling stop included.

Metabo BE 850-2 (BZP)

An advanced version with increased power (850 W) and speed (up to 3100 rpm), which has all the functionality necessary for work. High-quality assembly, excellent ergonomics, convenient keyless chuck with a diameter of 1.5-13 mm. Equipped with a safety clutch and intelligent speed control. According to customer reviews, it is one of the best models in 2020. Additional handle included.

• good ergonomics;
• the presence of two speeds;
• the case of the gearbox made of silumin, which prevents strong heating;
• automatic safety clutch to disconnect the drive when the drill stops;
• the ability to use bits without a chuck.

• slightly overpriced in its class;
• no storage case.

Metabo BEV 1300-2 (SGP)

Powerful (1300 W) revolving drill with a maximum torque of 44 Nm and a lot of positive feedback. A real find for professionals. The swivel bridge allows you to achieve the required power when rotating in the opposite direction, a fundamentally new electronics for automatic control of the rotation speed depending on the material,a motor with special clogging protection to increase the durability of the device - far from a complete list of the advanced functionality of the drill. A key cartridge type and relatively light weight (2.7 kg) for its class.

• high power;
• electronic protection against overload and restart;
• special cable entry to protect the cord and great freedom of movement;
• electronic speed control depending on the material and its stabilization when working under load.

• small radial and axial play of the cartridge.

Metabo WBE 700 angle drill

Unique tool for drilling in hard-to-reach places with chuck at 90 ° to the body. The engine power is 705 W, the number of revolutions per minute - up to 2050. Equipped with a key chuck with a diameter of 10 mm, the function of spindle locking and electronic speed control. Power supply - from the network.

• work in hard-to-reach places;
• electronic speed control;
• side handle included.

• there is no possibility of reverse.

Top Best Metabo Impact Drills 2020

	Metabo SBE 850-2 LIMITED EDITION	Metabo SBE 650 Impuls	Metabo SBEV 1300-2 (SGP) Box
Power, W	850	650	1300
Number of revolutions, rpm	3100	2800	3100
Number of blows, beats / min	58900	44800	58900
Cartridge	Keyless	Keyless	Key
Weight, kg	2.6	1.8	2.8
Average price, p	8700-11800	4200-5300	9700-12200

Metabo SBE 850-2 LIMITED EDITION (FuturoPlus)

The powerful 2-speed hammer drill is designed for drilling a wide variety of materials, from wood to concrete. Multifunctional, lightweight and convenient device. Of the technical characteristics, it is worth noting a power of 850 W and a torque of up to 36 Nm. This makes it possible to achieve high performance in terms of the number of revolutions (up to 3100 rpm) and impacts (up to 58900 beats / min). Handle and drill stop included.

• quiet and virtually no vibration;
• convenient and comfortable;
• engine power and speed;
• small weight;
• the reliable FuturoPlus chuck.

• no case included;
• slight beating of the tooling in the chuck.

Metabo SBE 650 Impuls

Inexpensive 650 W hammer drill from Metabo. The average price of this copy does not exceed 4.5 thousand rubles. Handy small tool with keyless chuck for household use. The standard set of functions for Metabo tools are reverse, automatic control of rotation speed, lock of the start button. Additional pulse mode for working with stuck screws and on absolutely smooth surfaces.

• convenient keyless chuck;
• the presence of a "pulse" mode;
• automatic control of turns depending on the characteristics of the processed surface;
• reliability and durability.

• afraid of dust.

Metabo SBEV 1300-2 (SGP) Box

A revolving professional drill with a strong impact at a frequency of about 6000 bpm and the best torque up to 44 Nm. Bestseller of 2020. Despite the rather high price, it justifies the costs due to its versatility and reliability. Good ergonomics and materials of the handle and body. Two working speeds, maximum drilling diameter in concrete up to 22 mm, relatively low weight (2.8 kg). Possibility to work in a drill stand.

• best torque;
• dust protection to ensure a long service life;
• overload and restart protection;
• reliable and comfortable materials of the body and handle.

• high price;
• the presence of a key chuck leads to a loss of time when changing equipment.

Drill mixers Metabo

	Metabo RWE 1020	Metabo RWEV 1600-2	Metabo RW 18 LTX 120
Power, W	1300	1600	-
Voltage, V	-	-	18
Number of revolutions, rpm	900	680	750
Weight, kg	3.1	4.5	4.2
Average price, p	9300-10900	18900-20800	30000-37700

Metabo RWE 1020

Low-speed (up to 900 rpm) inexpensive 1300 Watt drill mixer. One of the most popular models in 2020. Mixes paints and other liquids quickly. The comfortable grip reduces the strain on the user. The drill body is protected from the mixed liquid by a special casing. It is connected to the network with a 4 meter cable.Equipped with electronic speed control and additional handle.

• electronic control of mixing speed for various materials;
• protection against contamination with a special casing;
• side outlet of the network cable to reduce the risk of breakage;
• rubberized corners to prevent damage.

• low maximum speed;
• restriction on the diameter of the nozzle - 120 mm.

Metabo RWEV 1600-2

A more advanced version of a low-speed (up to 680 rpm) 1600 W drill-mixer. Two working speeds, the ability to use attachments with a diameter of up to 160 mm, electronic speed control, the ability to block the start button are the main advantages of this mixer.

• ergonomic handle position;
• good torque due to the use of a two-stage gearbox;
• soft start function to prevent splashes when starting stirring;
• rubber protection for the case and speed switch.

• relatively heavy weight;
• high price.

Metabo RW 18 LTX 120

Cordless mixer for working on an open site with limited access to the electrical network. During operation, a relatively high number of revolutions is achieved - up to 750 per minute. Has an electronic control of the frequency of rotation and an additional handle included.

• the ability to use away from the electrical network;
• special Ultra-M technology: maximum performance, gentle charging and a three-year battery warranty;
• overload protection function;
• protection of metal surfaces from damage and ingress of particles of mixed materials;
• rechargeable battery with charge indicator.

• the need for charging.

Best Metabo Drills 2020

	Metabo PowerMaxx BS Quick Basic	Metabo PowerMaxx BS 18 L Quick	Metabo PowerMaxx BS 18 LTX Impuls
Torque, Nm	34	48	110
Number of revolutions, rpm	1400	1600	1700
Battery voltage, V	10.8	18	18
Battery capacity, Ah	2	2	4
Weight, kg	0.8	1.6	2
Average price, p	8600-9900	11000-12100	22200-28600

Metabo PowerMaxx BS Quick Basic

Compact drill with screwdriver function with a lightweight design (weight only 800 g) and a fairly high number of revolutions - up to 1400 per minute. Quick replacement of the holder and attachment for various types of work. Fast battery charging time (capacity 2 Ah) and spot light. A great tool for household use.

• excellent weight distribution, convenient and powerful drill / screwdriver;
• the ability to use without a cartridge;
• convenient hook for wearing on the belt;
• case included;
• fast charging, additional battery included, battery charge indication.

• heats up quickly when drilling;
• insufficiently strong spindle lock;
• susceptible to dirt and dust due to the large ventilation holes in the case.

Metabo PowerMaxx BS 18 L Quick

Powerful drill / driver with short body and two working speeds. High torque (48 Nm), very convenient removable chuck and drilling diameters up to 20 mm in wood and 10 mm in metal. Battery type - lithium-ion with a voltage of 18 V and a capacity of 2 Ah. Equipped with a reverse, the ability to use bits without a chuck and a special socket for mounting bits. One of the best options in terms of price-quality ratio in its category.

• high speed and torque;
• built-in backlight for optimal illumination of the work area;
• powerful battery with large capacity.

• not strong enough fasteners for bits;
• no backlight adjustment.

Metabo PowerMaxx BS 18 LTX Impuls

One of the most powerful screwdrivers with a maximum speed of up to 1700 rpm and a torque of up to 110 Nm. Allows making holes up to 65 mm in diameter in wood and up to 13 mm in metal. Used by professionals - electricians, furniture assemblers, builders. The tool is equipped with a pulse mode for unscrewing firmly "seated" screws, a motor brake function, a reversible mode. Three removable batteries with a capacity of 4 Ah, carrying case and additional handle included.

• best torque;
• large battery capacity;
• large drilling diameter in wood and metal;
• reliable and durable.

• a technically difficult option for an ordinary user;
  high price.

Metabo offers a wide range of drilling tools - hammer drills, hammer drills, screwdrivers, drill mixers. According to customer reviews, offers from a German company are distinguished by their special workmanship, reliability and durability. Metabo drill models are characterized by a high level of electronic control, excellent ergonomics and versatility. In terms of value for money, it is one of the best products on the electric tool market in 2020.