Ranking of the best construction stationary mixers in 2020

A construction stationary mixer is an important and not too cheap device, among others, necessary for repair and construction work. It is important to know how to choose a decent stationary construction mixer with the right parameters and the required characteristics at an affordable and affordable price? The rating of the best products below, with an indication of their advantages and disadvantages, is intended to facilitate the choice.

Main features of the stationary mixer

The main feature is that the stationary mixer does not require constant holding in the hands. At the same time, the labor intensity of work on the preparation of concrete solutions and various building mixtures is significantly reduced.

The advantages of stationary mixers

Another not unimportant advantage is that mixers of this type can keep a large amount of building material in a non-solidifying state for a long time. Constantly stirring the solution, the mixer does not allow it to harden for the time required for its consumption.

This is useful if you need a slow flow of material. Especially if at the same time there should be a lot of material and strictly the same consistency. For example, decorative plaster, which is applied over a large area by one specialist using coloring components. Frequent mixing will lead to uneven color of the material, which is unacceptable. Using a stationary mixer will free you from such disadvantages.

The presence of a special container frees you from the need to use additional construction utensils, the shape of which is not always convenient for stirring mixtures. The special inner shape of the containers of stationary mixers is ideal for mixing the entire volume of the material used.

Best Stand Mixers 2020

Although the best choice for a specific unit will be its most complete correspondence to the necessary requests, its functionality, taking into account the user category. Low-cost mixers, naturally, will contain the minimum of necessary functions. It is advisable to purchase a professional apparatus with greater mechanization. Here, such parameter as durability will also be important, which depends on the assembly, and, of course, on the manufacturer.

Reputable manufacturers often use more advanced production technologies with a significant increase in product quality, while almost not raising the price of the product. Although this is not always the case. It may be the other way around. Therefore, when choosing a specific manufacturer and model, it is better to study, if possible, all the most important aspects. Some of them are intended to highlight this article.

Mixer AGP AM 5000NC

Lee Yeong Industrial Ltd is a Taiwanese company founded in 1988. It manufactures a wide range of products under the AGP brand with an emphasis on tool reliability and product quality.

The model of the construction stationary mixer AM 5000NC differs from the AM 5000 by the presence of a metal protective grill instead of a plastic protective cover. Other features of these models are insignificant.

This is a single-speed unit with a power consumption of 1 kW, the net power delivered to the load is about 560 W. In this case, there is an electronic motor protection. The torque is 105 Nm. The maximum number of revolutions is 65 rpm.

The mixing container is 50 liters. One removable spindle is installed on the motor shaft through a chuck. The dimensions of the device are: 940 mm × 580 mm × 780 mm. For ease of movement of the device during operation, 2 small wheels are fixed on the frame. A special convenient folding T-shaped handle is used to lift the cover with an electric motor and move the device.

Weighs 32 kg. Estimated price: from 34,950 rubles to 36,871 rubles.

• justified apparatus for those who are engaged in plastering;
• you can add putty or cement for thickening, or water for thinning directly through the mesh without turning off the unit;
• you do not need an assistant, you can refuse his services, having this device.

• heavy.

Mixer BATTIPAV 050S

The company, which specialized mainly in the production of roller vibrating plates, was opened in 1970. The use of innovative technologies in the production of tools for laying and processing ceramic tiles brought the company popularity in the 80s, when it occupied a leading position in Europe. The products are manufactured in Italy, but are available in more than 80 countries around the world. The authenticity of products can be easily verified by the engraved quality mark on all products of this brand.

The area of ​​application of the stationary mixer BATTIPAV 050S is included in almost all types of work related to the preparation of building mixtures and mortars. This device can be used both for external and internal work. Also, for cosmetic or major repairs, it can be irreplaceable, reducing the labor intensity of the work. The large tank capacity of 65 liters reduces the time required to prepare new batches. It also facilitates the use of the mixer in brigade work. Belongs to the professional class.

The power of the installation is 1200 W, single speed with one spindle. The number of revolutions of which is 60 rpm. The basin and lid are made of high quality plastic. Dimensions: 1,000 mm × 600 mm × 800 mm. The frame, made of metal tubes, has castors and a T-handle for easy transport.

Weighs 24 kg. Product price: 51 419 rubles.

• overpowers a steep mix under a semi-dry screed;
• large tank capacity, 65 liters, enough for a large amount of work;
• Italian quality;
• mixes well concrete mortars, constant stirring prevents "setting" even with a high concentration of gypsum.

• rarely on sale;
• the price is high.

Mixer Eibenstock Automix 1801

The Eibenstock company began its existence back in 1919. Not far from the city of Leipzig, Germany, the enterprise is located, which at the moment has already taken a leading position in the production of modern power tools. The powerful, not only production, but also scientific and technical base of the concern contributes to the production of highly productive equipment.

Construction, stationary mixer of this model is designed for mixing mixtures of high and medium viscosity. It can prepare mortars with cement, plaster, leveling mortars, stir grouting compounds and prepare screed materials. You can also mix the consistency from the ready-made mortar up to 65 liters.

The power consumption of the installation is 1.5 kW. Idling speed - 115 rpm, under load - about 70 rpm. Equipped with a mechanical safety stop, which is characterized by increased reliability of operation.A distinctive feature of the unit is the presence of a metal casing around the front of the tank. It protects the plastic bowl from possible damage during the operation of the installation in various conditions.

The lever is hinged for easy container replacement. The equipment can be moved using the T-handle. For this purpose, an axle with high strength plastic wheels is installed on the frame. Spindle connection with blade for thread size M20.

Weighs 26.5 kg. Price: 55,000 rubles.

• German build quality.

• high price.

Universal mixer with a gearbox from the STROYMIX company

The Russian company STROYMIX is engaged in various activities in the field of construction. One of them is the release of tools and materials. They have developed and are producing a device based on a motor with a gearbox. The pulley from the gearbox is made of stainless steel, which allows the device to be used even in food production.

The design versatility lies in the fact that it can be installed on a container with a volume of 1 to 90 liters. For this, the geared motor is equipped with 4 bolts for fastening to various kinds of attachments. But it is usually produced installed on ready-made containers made of aluminum, stainless steel, tin or plastic. Most often in a volume of 40 liters, 65 liters, 90 liters.

A wide range of applications includes mixing adhesives, paint mixtures, epoxy adhesives. And also all kinds of plasters and putty solutions. It can even be used for mixing feed mixtures, making compound feeds.

The unit is made on the basis of a single-phase motor powered by an alternating current of 220 V. However, there are options for a three-phase electric motor with a supply voltage of 380 V. The motor power can also be different, but a device with a 500 W, 650 W motor has the best data.

The number of revolutions of the engine is 1,500 rpm, after the reducer the pulley rotates at a speed of 50 - 55 rpm. The design can be supplemented with an electronic speed control. Using a lower speed eliminates air entrapment in the prepared mixture. As a result, it is more uniform.

Some structures of this type from the STROYMIX company with a metal tank are equipped with a special electric heater at the bottom of the tank for heating. And also with special sensors for turning off the electric motor when opening the cover with the installation. This convenience allows you to safely take the mixture while mixing. The frame with a foldable metal tube handle is complemented by wheels for easy movement of the unit.

There are two popular modifications:

• STROYMIKS-65A

The device has a motor - 220 V, 50 Hz, 1 400 rpm, with a gearbox 50/55 rpm. The productivity is 500 kg / h.

• STROYMIKS-65V

The device has a motor power of 1.1 kW and an adjustment of the stirrer speed from 0 to 600 rpm. The maximum finish diameter is 142 mm. Productivity increased to 600 kg / h.

The weight of the unit depends on the frame design and the container used. There are designs with a tank with a capacity of 40 liters, 65 liters, 90 liters, which weigh 10 kg, 12 kg and 16 kg, respectively. Installation price from 30,000 to 35,000 rubles.

• a very wide range of applications;
• there is a possibility of conversion for different capacities;
• relatively cheap.

• in some structures, care must be taken to avoid overturning the container during operation. It is necessary to put in a more stable position.

Mixer Iperbet Fluid

The LITOKOL company was founded back in 1968 in Italy. She specialized in producing tile adhesive... Now the company is engaged in the production of construction chemicals and tools for all work related to ceramic tiles. In this area, she occupies a leading position.

A distinctive design feature of the Iperbet Fluid mixer is that the container rotates in it, and the blade is fixed motionless.It is designed for mixing self-leveling mortars, tile adhesives, flowing mortars. Designed for the preparation of mixtures of low viscosity.

But it can also be used for the preparation of plaster and cement mixtures. In this case, a smaller volume is kneaded to prevent the bucket from sliding in the moving platform. When stirring a thicker mixture, it can be taken directly from the bucket with a trowel. The rest of the material can continue to rotate with the bucket, preventing it from hardening. The plant productivity is 300 kg / h.

The folding mechanism allows the blade to be removed from the bucket. In this position, you can remove the bucket from the platform. It is driven by an electric motor installed at the bottom of the unit. This part is covered with a metal casing. This design more reliably protects the electric motor from the ingress of liquids or precipitation into it. Also, moving internal parts are reliably protected from foreign objects falling into them.

An economical motor with a supply voltage of 220 V, 50 Hz, with a power of 370 W. Two-speed system: 55 and 66 rpm. The bucket has a capacity of 45 liters. The delivery set includes an additional container, a blade. Also a hex wrench for the nuts for fastening the blade and setting it to the desired position. Construction dimensions: 600 mm × 510 mm × 770 mm.

Weighs 34 kg. Price: 60 970 rubles.

• very convenient for mixing, for example, tile glue;
• good user experience with a compact design.

• it's expensive.

Mixer MIX-60 IMER

Recognized leader in the production of various construction tools, company, IMER, Italy. The company started its activity in 1962 and now has branches in many countries of the world. In the development and manufacture of its products, the company focuses on minimizing environmental harm. The devices are manufactured with a high class of environmental friendliness. The quality of the products complies with all international rules and standards.

It is intended for mixing various mixtures, adhesive solutions, plasters and putties. And also for preparation for use of various ready-made adhesives. Single speed with one spindle.

The power of the electric motor is 550 W, on which the electronic protection is installed. The number of revolutions after the gearbox is 55 rpm. The noise level during operation is about 65 dB. The capacity of the plastic bowl is 56 liters.

Weighs 30 kg. Price: 50 527 rubles.

• simple and compact design;
• easy to transport, quiet in operation.

• the nuts on the blades are tightly clamped or unscrewed;
• cannot be used for mixing a mixture with expanded clay or fine gravel, so as not to damage the basin.

Mixer-stirrer COLLOMIX AOX 600

COLLOMIX, headquartered in Germany, represents a unique combination of high productivity and product quality. An interesting model of a mixer for mixing various compositions is made by the manufacturers of this company. It uses 2 drives: one goes to the nozzle, the second to the container, which rotate in the opposite direction to each other.

Due to the possibility of changing the working elements of the mixer, the device has a wide range of applications. He can stir the mixture qualitatively, while breaking lumps, if any. A separate drive for the container will keep the composition in a non-solidifying form for a long time. The presence of a special scraper prevents the mixture from sticking to the tank walls.

The tank capacity of this construction mixer is 65 liters, of which about 40 liters are used for filling the mixture, which is about 60 kg. Such volumes allow mixing the mixture for a team of specialists.

The unit is powered by a single-phase voltage 220 V, 50 Hz with a load current of at least 10 A. The motor power for the spindle drive, which rotates at a speed of 750 rpm, is 1 kW. Drive power per reservoir - 550 W, speed - 18 rpm.

Weighs 51 kg. Price: 202 386 rubles.

• highly productive, multifunctional plant with great capabilities and volume.

• due to the high price, it is used only for professional and team work.

The considered construction stationary mixers have a number of advantages in comparison with hand-held devices of this type. Their use in practice reduces the complexity of the process of preparing a construction mixture. Also, there is no need for auxiliary helpers.

The market for this kind of products is represented mainly by Italian and German manufacturers. Products of this category made by manufacturers of domestic companies also have good characteristics.