Rating of the best remedies for mold on the walls for 2020

Such an unsightly phenomenon as mold, by its presence, not only worsens the appearance of the room, violating all the laws of hygiene and aesthetics, but also provokes health problems. Green, gray and black mold is a fungus that grows on walls and gradually spreads to other surfaces - furniture, interior items, carpets, clothing. As a result of the appearance of dark spots of the fungus, the surfaces deteriorate, often it is necessary to remove part of the wall. In addition, the occurrence of fungal deposits is accompanied by an unpleasant odor of dampness. Special anti-mold products will help to cope with the problem.

Why is mold dangerous?

Spores, getting into the human body and settling there, can cause a respiratory tract infection. Continuous and regular inhalation of spores can provoke a number of diseases, including:

• weakening of immunity;
• tachycardia;
• allergy;
• bronchitis;
• conjunctivitis;
• stomatitis;
• dermatitis;
• thrush;
• bronchial asthma.

To prevent the development of diseases, you must immediately declare war on the invader, not allowing the fungus to cause serious harm.

The causes of mold

First you need to understand the reasons for the appearance of such an unpleasant and dangerous neighbor, like mold. The fungus occurs in conditions of warmth and constant dampness, as well as in old buildings where the insulation of interpanel seams is broken and the walls get wet during rain and wet weather.

Plastic windows can contribute to the appearance of moisture on the surface of the wall. Another reason for the spread of mold can be poor insulation of premises. Violations of wall drying during repairs can also provoke the appearance of fungus. Living in such rooms is harmful, so you need to start eliminating the fungus as early as possible - the older it is, the more difficult it is to deal with it.

How to deal with a fungus?

To destroy the mold, you need to clean the room from moisture and dampness, treat it with special antiseptic agents, which include aggressive chemicals that effectively remove mold. Such funds can be purchased at any store. They are available in the form of liquids, sprays, concentrates. When working with such powerful tools, you need to observe safety measures: be in work clothes, rubber gloves, a scarf, goggles. The chemical is applied to the walls and then removed along with the fungus.The best way to remove mold and prevent it from reoccurring is to scrub it down to the base of the wall and apply an antiseptic primer.

Home remedies can be an alternative method to combat mold. It is desirable to combine both those and other substances with a mechanical method of removing the fungus. It will also not be superfluous to install a forced exhaust ventilation device, to eliminate voids in the walls.

TOP home remedies for mold

Before declaring a full-scale chemical war on fungus and mold, you can seek help from home and folk remedies that can cope well with the infection. They are readily available, can be purchased from a pharmacy or hardware store, and they are also affordable.

• Vinegar

Almost invariably present in any home. Despite its culinary purpose, vinegar can eat away fungal deposits, and the effect will last up to several years. For processing, you need to spray vinegar on the infected areas, after an hour, thoroughly wipe these places with a wet rag or sponge, and then let the surface dry. As a result, mold will disappear for a long time, and with it the unpleasant smell of dampness.

• Chlorine

This affordable, inexpensive product is suitable for the bathroom, as well as for treating wooden surfaces. Since bleach has a pungent odor, cleaning should be carried out with a respirator, protective gloves, and isolate children and animals. Before starting work, bleach should be diluted with water in a 1: 1 ratio and spray the resulting solution with a spray bottle. After the procedure, the bleach does not need to be washed off the walls. It should be noted that chlorine has a double effect - it destroys harmful microorganisms and has a whitening effect. The effect of the application is noticeable immediately.

• Ammonia

Small mold stains can be removed with ammonia (ammonia solution). To do this, you need to dilute it with water in a 1: 1 ratio and spray it on the areas affected by the fungus. After a while, the solution is washed off with water. Ammonia has a strong odor that can cause dizziness, so you need to wear a respirator and gloves to protect your skin when working with it. Processing should be done carefully. In no case should ammonia be mixed with chlorine - the resulting chemical turns into a poisonous solution that can cause serious harm to health.

• Copper sulfate

This inexpensive substance is well known to gardeners. Before using it, you must first clean the infected area with soap and water, dry it, and only then spray with an aqueous solution of copper sulfate. If necessary, this procedure can be repeated up to 3 times.

• Bura

Natural antiseptic of mineral origin, effectively corroding mold and other types of fungus. The solution is prepared in proportions of 1 cup of borax to 2.5 liters of water. With this mixture, you need to clean the area affected by the fungus, allow it to dry completely, and then remove the crystals formed with a cloth.

• Soda

The simplest and most harmless remedy with natural antiseptic properties. To disinfect small areas of mold, prepare a solution in the ratio of 1 teaspoon of soda to 1 glass of water. The resulting mixture is applied with a sponge or sprayed from a spray bottle. Rinse off the soda solution is not required.

The most inexpensive mold removal and prevention products

"Abedis 06"

Polish product with a high level of safety - "Abedis 06" is universal, it is allowed to use in children's rooms. The main component of the product is guanidine, a strong antiseptic. The product is suitable for interior and exterior treatment of a building, as well as small structures such as a gazebo or greenhouse. Also, with this emulsion, you can disinfect garden paths."Abedis 06" can be used for prophylaxis (the drug can be added to paints and mortars) and to remove fungal plaque.

Before work, the emulsion should be diluted with water in a ratio of 1: 2, then, with the resulting solution, treat the contaminated surfaces. The mixture is left for a day until completely dry, after which it is removed with water. When the treated surface is completely dry, it is recommended to repeat the procedure, but not earlier than after 3 days. Despite the harmless composition, protective equipment must be used when working.

The average cost is 177 rubles.

• suitable for children's rooms;
• the composition does not contain harmful components;
• budget drug;
• excellent result.

• not found.

"Neomid Bio Repair"

An environmentally friendly disinfectant made in Russia. Thanks to its formula containing substances harmless to humans, as well as a reasonable ratio of price and quality, it has gained particular popularity. It is available in the form of a ready-made solution for treating small rooms, apartments, or a concentrate for cleaning large areas of contamination. In addition, Neomid Bio Repair is used during the construction phase as a prophylactic agent to prevent mold.

The drug is sprayed onto the infected area, after which it is left for two hours. After that, remove with a scraper. The procedure can be repeated if necessary. If the treatment takes place in the open air, it is not recommended to get moisture on the cleaned surface - the humidity should be no higher than 60%, and the temperature should be from 15 to 20 degrees Celsius. If the treatment is carried out in a closed room, ensure good ventilation. The duration of the effect, according to the manufacturer, reaches 20 years.

The average cost is - 289 rubles.

• convenient release forms
• price-quality ratio;
• ease of use;
• safe components in the composition;
• does not affect the original color of materials;
• long lasting effect.

• strong chemical odor.

"Biotol-spray"

A powerful Russian antibacterial agent for treating surfaces made of natural stone, wood, concrete and other common materials. The product does not contain heavy metals, mercury and chlorine. Has a weak chemical odor. Biotol-Spray demonstrates a wide range of applications - treatment of basements, building facades, attics, roofs, balconies, as well as disinfection of architectural monuments, memorial fences, slabs and restoration work.

If the infestation is strong, the surface must first be cleaned of mold mechanically using a scraper or brush, carefully removing the layer of contamination, trying not to spread the fungus to adjacent clean areas.

It is recommended to spray the spray onto the treated area from a distance of 30 cm, then leave the solution for a day or two, after which you can remove the drug along with the fungus and clean the surface with a brush. The solution can be reapplied if the infection is old or advanced.

The average price is - 300 rubles.

• strong drug;
• suitable for most materials;
• no harmful impurities;
• faint smell.

• not found.

"Belinka"

A widespread drug produced in Slovenia. "Belinka" does not contain any bleaching agent, and does not affect the color of the treated surface, which is why it is used for the treatment of colored surfaces. The substance quickly and successfully removes numerous types of fungus, both in dry rooms and in places of high humidity. Suitable for the treatment of concrete and plaster surfaces and is used for decontaminating ceilings, walls, floors, attic and basement.

To get started, you need to prepare a solution in a ratio of 1: 4, which is applied to the affected surface with a brush or spray. It is recommended to work at temperatures above 5 degrees Celsius, and a humidity level not exceeding 80%. After the solution has completely dried, dirt can be removed, preferably with hot water and under pressure. Large areas affected by fungus are best re-cleaned. After drying, you need to apply a primer, and then a topcoat.

The average cost is 350 rubles.

• does not distort the color of the material;
• for dry and damp rooms;
• wide range of applications;
• affordable price.

• not found.

Medium price segment mold remedies

"Pufas AMSS"

A highly effective drug from a German manufacturer that can cleanse the infected area almost instantly. Possessing a powerful effect, the drug does not contain chlorine in its composition. The wide area of ​​application of the product includes such premises as the kitchen, bathroom or shower room, bathroom, balcony, basement of the building, facade, attic and roof. Pufas AMSS does not spoil the material to which it is applied, therefore it can be used to disinfect decorative elements. Also, the tool can be used as a preventive measure during construction or finishing work.

Comes in a handy package with a built-in spray bottle. Before work, you need to ensure your safety by wearing protective glasses and gloves. The drug is recommended to be sprayed onto the treated area from a distance of 20 cm. It is necessary to completely saturate the surface with the solution, and then leave it to dry completely (3 days). If after this period traces of mold remain on the site, the procedure should be repeated without rinsing off the solution. The remains of the drug are washed off with water.

The average price is - 473 rubles.

• fast action;
• convenient packaging;
• long-term and reliable protection.

• high price.

"Olympus stop mold"

A product from a Russian manufacturer that creates long-term and reliable protection against fungal deposits. It has a wide range of applications, can be used in wet rooms: bathrooms, showers, saunas, swimming pools, as well as basements, basements and attics, facades and roofs of buildings. With the help of "Olympus Stop Mold" you can remove fungus from concrete, tile, natural stone, brick, wood and plaster. At the same time, the drug is harmless to humans and pets, since the composition does not contain chlorine or harmful volatile substances. Also, it does not change the color and texture of the treated surfaces.

Before starting disinfection, you must first remove the layer of fungal plaque, check if old paint, plaster and other materials are peeling off - the surface should be as smooth as possible and not contain large particles of debris. The solution is produced ready-made; it does not need to be additionally diluted with water. "Olympus stop mold" is applied with a brush, construction roller or spray (at a distance of 20 cm). For best results, it is recommended to apply two coats of the product. The product dries completely within 24 hours.

The average price is - 479 rubles.

• attractive cost;
• safety;
• high efficiency;
• convenient packaging;
• no smell.

• not found.

"Dali"

Russian universal preparation suitable for use on wood, concrete, brick and drywall surfaces. It can penetrate deep inside, even under a layer of plaster, which eliminates the need to remove it before starting work. The product does not contain chlorine, which makes it harmless to people prone to allergic reactions. "Dali" is quickly absorbed and does not spoil the appearance of materials.

The solution can be applied with a roller, wide brush or spray. You should also follow safety precautions, use a respirator, protective gloves. The temperature during processing should be at least 5 degrees Celsius. "Dali" demonstrates a high penetrating power, its complete drying occurs within a day. If the surface is heavily contaminated, it must first be cleaned mechanically, rinsed thoroughly with water and dried completely. Remove dirt residues with a brush after two days after drying.

The average price is - 580 rubles.

• penetrates deeply into the material;
• fast absorption;
• does not spoil the color and texture of materials.

• has a pungent chemical odor.

"Sazi Wepost Luxe"

Antifungal agent of Russian production, which can be used outside and inside the premises. The manufacturer recommends using the drug in combination with a water repellent to provide protection against the harmful effects of dust and moisture - after its application, a thin invisible layer remains on the surface, preventing the penetration of moisture. Thanks to this, the material treated with mortar increases the level of waterproofing.

Disinfection is carried out in two stages. On the first, the antiseptic included in the composition deals with the destruction of mold. The agent must be left to dry, then reapplied according to the instructions, and then remove the residue with a scraper. At the second stage, it is recommended to apply a water repellent for reliable protection against the negative effects of the external environment. Sazi Wepost Luxe has a long-lasting effect.

The average price is - 750 rubles.

• does not spoil the appearance of materials;
• increases moisture protection;
• prevents the reappearance of the fungus.

• not found.

Premium mold remedies

"Savo"

An effective Czech remedy for preventing the formation of fungi and removing mold. The main active ingredient - sodium hypochlorite - is able to successfully cope with any type of mold. The drug can be applied immediately, without preliminary chemical or mechanical treatment of the infected area. It is produced in the form of a spray, which allows the solution to penetrate deeply into pits and crevices, thereby providing the best result. Savo can be used in rooms such as bathrooms, showers, saunas, swimming pools, plinths and attics.

Wear protective gloves and a respirator before starting work. Savo should be sprayed onto the surface from a distance of 10 cm, focusing on irregularities and crevices. Then, the applied composition must be left for 20-30 minutes, and then washed off with water. After complete drying, the surface can be re-treated if there are traces of contamination. Two treatments are usually sufficient to get rid of mold completely. If the area of ​​infection covers large areas, and the treatment is carried out in a closed, living room, it is recommended to leave it for 1-2 days, since the drug has a pungent chemical odor. With a small infestation and a small processing area, it is enough to provide good ventilation of the room, or open windows for ventilation.

The average cost is - 1,020 rubles.

• convenient form of release;
• can be used for preventive maintenance;
• effective and long-lasting result.

• strong smell;
• high price.

"Fongifluid Alp"

Russian antifungal agent for the destruction of all types of mold, moss and lichen from wooden surfaces. It is used for the prevention and treatment of rooms with high levels of humidity: bathrooms, steam rooms, saunas, showers, basements, greenhouses, as well as buildings exposed to moisture - fences, fences, outdoor wooden structures. Suitable for processing various materials: plaster, concrete, brick, drywall, natural stone, ceramics, tiles.The drug penetrates deeply into the treated area, while it does not form a film and does not distort the surface color. The product contains no harmful chemical components or toxins, it is safe and environmentally friendly.

"Fongifluid Alpa" is completely ready for work and does not need to be diluted. If the infection is old or severe, it is recommended to apply the solution twice. After application, it must be left to dry completely (4 to 6 days).

The average cost is - 1,650 rubles.

• gently cleans the surface;
• does not leave streaks;
• is produced ready-made.

• high price.

"Terrasterill"

Highly effective Russian biocidal agent for external and internal treatment of premises. It successfully copes with various types of mold, fungus, moss, lichen and algae. The preparation contains active fungicides that have a disinfecting effect and prevent the re-formation of fungal plaque. At the same time, "Terrasterill" does not contain harmful chemical compounds, solvents - it is an ecological water-based solution. It has good penetrating ability, and is also able to strengthen and level the surface, increasing its moisture-proof properties. The antiseptic not only does not spoil the appearance of the material, but also evens out its color, in addition, the solution can be tinted in a shade similar to the shade of the treated coating. Another significant advantage of Terrasterill is its drying time of only 18 hours. The solution is suitable for disinfecting concrete, plaster, brick, minerals and painted surfaces.

It is better to apply it with a brush or sponge, carefully rubbing the liquid into the infected areas. After the surface is saturated, it must be cleaned with a brush, then rinsed with water. If the damage is deep, the solution can be applied in two to three layers.

The average cost is - 1,858 rubles.

• for external and internal processing;
• long-term result;
• environmentally friendly;
• has a beneficial effect on the material.

• high price.

Do not wait for unsightly mold to actively conquer the space of the room - the older it is, the more difficult it is to remove it. The use of the home and factory chemicals described above will allow for a long time, and in cases with powerful drugs and forever, to get rid of mold and mildew, these unwanted and unhealthy guests.