Rating of the best pipe cleaners in 2019

Home piping is one of the aspects of comfortable living, so its serviceability is important for every person. However, without regular maintenance, problems such as blockages arise, which cause serious damage. To solve this situation, many resort to chemical pipe cleaning agents. The material below will help you make the right choice.

Attention! You can read about the best blockages in 2020 here.

The causes of blockage

In any apartment or private house, a canal system is installed that removes impurities. However, regular operation leads to the settling of various contaminants, which leads to blockage of pipes.

The main factors causing blockages are:

• The use of the pipeline for other purposes. Sparingly soluble substances and compounds entering the pipeline: food residues, hygiene products and pieces of rags or sponges, which are pressed into a lump, thereby blocking the flow of water
• Errors in sewerage design. If the installation of pipes does not comply with the standards, such as the angle of inclination, turns or connections of the pipeline, then it is necessary to change the entire sewer system to prevent blockage;
• Natural deposition process. The active operation of soap, detergents and protein contents over time causes corrosion, so it is easier for residues to linger on the surface of rusty pipes;
• Lack of prevention. To keep the pipes clean, it is sometimes necessary to carry out preventive measures - light pipe cleaning.

Prevention of blockages in the sewer system

In order to avoid such problems, it is worth adhering to some ordinary rules:

1. Throw away leftover food in the trash bin before washing the dishes;
2. A piece of toilet paper, rags, sponges or hygiene products thrown into the toilet can gradually clog up, so you need to throw household residues into the trash bin;
3. The habit of flushing cement, sand and plaster residues through the sewer also provokes a blockage, so you should not resort to such actions;
4. During the month, it is worth using a pipeline cleaner once so that any residue does not accumulate on the surface of the pipes.

Signs of a blockage

The first sign of a clogged sewer system is a musty odor coming from the pipeline.

With constant use of the pipeline, protein and fat deposits begin to rot on the inner surface of the pipes, which become an obstacle to the flow of water, therefore, there is a slow escape of liquid from the sink.

Of course, at the beginning of the formation of a blockage, this sign is not strongly observed, but gradually the situation is aggravated.

Probably the most pronounced factor is when the water does not drain at all.

Criteria for choosing a means for cleaning pipes - what are they?

The effect of pipe cleaners depends on the type of mold being produced and the presence of chemicals. Guided by the desired result and the level of clogging, it is worth choosing the desired option.

Pipe cleaners can be divided into several consistencies:

• liquid;
• powder;
• granulated;
• gel.

These species are similar in action, but differ in the concentration and combination of chemicals in the content.

Liquid options were released as the first pipe cleaners, so they are more popular than many. These types are slower than other types and are consumed faster, and also include corrosive substances that can damage a plastic sewer pipe.

Gel products are much more effective than other types of gels because they penetrate deeply into the congestion. Such options quickly dissolve organic sediment, covering the inside of the pipeline with a light layer of gel, which becomes an obstacle to the next blockage. The gel formulation does not harm the plastic pipes.

Granular solvents are considered the best pipe cleaners. Due to the content of active disintegrating substances, this product acts instantly.

The dry composition must be poured into the drain hole and filled with the required volume of water. Within a second, the reagents of the granular agent dissolve the formed deposits inside the pipe. For such a case, 25-30 minutes are enough. The advantages of solvents in the form of granules are economy, pipe safety and quick use.

Powdered products are similar to the granular form. They are also economical in cost and efficient in operation. Of course, unlike granules, the fine composition of the solvent can remain on the skin surface, get into the lungs, thereby causing allergies and burns.

Sewer pipe cleaning rules

Before choosing the right solvent, it is worth stocking up on information on the correct use of these substances. After all, the use of cleaning agents based on chemical elements requires compliance with safety regulations.

1. It is imperative to read the instructions, which indicate which congestion the product affects, for example, such as organic matter, soap or grease.
2. Depending on the material of the pipes, it is worth choosing the necessary tool. After all, the granular agent can have a beneficial effect on metal, aluminum and plastic pipes, and the liquid version is caustic for plastic.
3. It is necessary to pour or pour the agent into the drain hole so that it does not get on the enamel or ceramic coatings.
4. When pouring out or falling asleep of the product, you should never lean your face against the drain hole so that substances do not get on your skin, face or respiratory tract. The best option is to wear a mask and hand gloves.
5. After using the solvent, it is worth ventilating the room by opening a window or door.
6. In order for the product not to damage the sewer pipes, it is worth using the solvent for a certain time specified in the instructions.
7. If the chemical content begins to go outside the drain hole, then it is worth stopping the action with a thin stream of water.
8. The presence of chemicals in solvents can seriously harm the health of the family and pets, therefore it is necessary to store the product in a protected area of ​​the house or apartment.

Best Liquid Pipe Cleaners 2019 Ranking

Mole

One of the most popular chemicals on the Russian market is Krot. It handles various types of blockages such as grease, soap, paper, food waste and hair.

This product fights bacteria and odors from the pipeline. Even toilet blockages and pipes full of water are subject to the "mole". It is absolutely suitable for preventive measures to prevent subsequent congestion.

The solvent contains:

• sodium and potassium hydroxides;
• chemical compounds (surfactants);
• varieties of acetic acid.

"Mole" has a low cost and is produced by several manufacturers, but these factors do not affect the capacity of the product. This product can be found in any stores in the form of a liquid, powder or gel, however, the first option is considered the most common.

Instructions for use:

1. First of all, it is necessary to pour or pour the required dose of the product (look on the package) into the drain hole;
2. Hold the product for about 4 hours (depending on the pipe material);
3. And last of all, you need to flush the drain with cold water. To prevent fumes from harming the skin or respiratory tract.

The ratio of price and quality speaks about the economy and effectiveness of the means for cleaning sewer pipes.

• prevalence in all stores;
• powerful action;
• low price;
• fight against unpleasant odor;
• safe impact on pipes;
• active in any blockages.

• inconvenient packaging;
• long period of action;
• harmful to the skin;
• the presence of a pungent odor.

Yplon Drain Cleaner

Yplon Drain Cleaner is a Belgian manufacturer that is characterized by reliable performance, which helps to get rid of blockages in pipes quickly and easily.

The solvent contains sodium hydroxide, a substance that actively fights against severe blockages. The reagent acts in 30 minutes with a mild congestion, but in a difficult situation it may take 10 hours.

The Belgian product is quite effective for plastic pipes, but detrimental to aluminum and ceramic options. The tool can also be used for prevention purposes.

• effective for severe blockages;
• the possibility of using fossilized formations;
• lack of unpleasant odor;
• convenient packaging with a closure lid;
• harmless to the skin.

• impossibility of use for pipes made of metal material;
• long cleaning period;
• high price.

Deboucher Active

Deboucher Active is a budget alternative to expensive sewer cleaning products. It copes well with any blockages like paper, grease, hair, animal hair, food debris and other organic matter.

The special solvent composition, including the necessary catalysts, surfactants, chlorine, potassium and sodium hydroxides, not only cope with complex congestion, but also helps in eliminating the unpleasant odor emanating from the pipes.

During operation, it is worth adhering to the safety rules according to the instructions:

1. First of all, it is necessary to pour 500 ml of solvent into the drain hole;
2. You should wait 1-2 hours for the remedy to work;
3. Wash off impurities with strong water pressure.

If the pipeline is heavily clogged, then pour out a liter of chemical agent, leaving it to stand overnight.

• efficiency in any blockages;
• elimination of fetid odor from pipes;
• protective cap to protect against children;
• budget price;
• slight smell of the product;
• no reaction with polymers;
• antibacterial.

• long reaction period;
• inefficiency;
• unsafe content.

Rating of the best gel pipe cleaners

Tiret

Tiret is an effective and popular gel that penetrates the structure of tough blockages even with stagnant water. It is active against organic and inorganic congestion and does not affect the composition of pipes made of metal or plastic materials. The product has a special formula that does not damage the inner walls of the sewer pipes.

The gel has a thick consistency, which allows you to pour in the desired dose. After application, the remedy takes effect within a few minutes. Of course, with complex obstruction, more time is needed for exposure.

In addition to removing blockages, Tiret removes foul odors from the sewer system for a long time.

How to use Tiret:

1. First of all, the solvent is poured into the drain hole (the required dose is in the product instructions);
2. With prevention and light blockage, you need to wait about 5 minutes, and for difficult situations it will take 30 minutes;
3. After the required time has elapsed, the pipe is flushed with 2 liters of hot water.

For a complete elimination, you need to repeat these steps up to 4 times in a row.

• fast action of the remedy;
• effective for organic and inorganic deposits;
• the ability to use for pipes made of any materials;
• elimination of unpleasant odor.

• inefficiency;
• high price;
• violent reaction.

Sanfor

Sanfor is an inexpensive alternative to Tiret gel that has similar capabilities. This tool copes with strong blockages of any nature in a short period of time. The solvent can also be used for prophylaxis.

The main qualities of Sanfor pipe cleaner are disinfection of kitchen and bathroom pipelines, getting rid of bacteria and eliminating unpleasant odors.

The solvent contains a hazardous content, but is effective as:

• Surfactant;
• hypochlorites;
• ADTA salts;
• sodium hydroxides.

For complete cleansing of the sewer from hair, food sediments and fat, the gel takes 5-10 minutes, even if the pipeline is filled with water. True, in stagnant water, the reaction takes longer. When performing cleaning actions, it is worth adhering to safety rules.

The tool quickly copes with the problem, while not damaging the surface of the sewer pipes, and thanks to the narrow and comfortable dispenser, getting into the drain hole with precision is not difficult. The thick consistency allows you to determine the required amount of gel.

• effective for complex blockages;
• elimination of unpleasant odor;
• disinfection of pipes;
• fast impact with severe congestion;
• convenient dispenser;
• safe for pipe surfaces;
• budget price.

• dangerous composition;
• inefficiency.

Rating of the best powder and granular pipe cleaners

Chirton "Clean Gutters"

Chirton Clean Gutters is an effective and versatile product from a foreign manufacturer, presented in the form of blue granules, powder or gel. It is a non-concentrated product that actively fights organic residues, soap deposits and corrosion.

When water reacts with granules, a slight alkaline effect occurs, which makes it possible to use the agent for cleaning kitchen sinks, bathtubs and toilet bowls. The solvent does not affect the enamel surface, while removing the rusty coating.

If you compare the cost of a product with its quality, then this is the best ratio in contrast to other similar products. The granules are also active in cold water, which indicates the safety of using the drug.

The product is sold in packages of 60 grams, which is enough for one application. The solvent has a pungent odor, which disappears after airing the room.

Powder product usage method:

1. The drain hole must be dry before use;
2. Pour the contents of the sachet into the drain hole;
3. The product must be filled with cold (300 ml) or hot water +80⁰C (1000 ml);
4. For the first option, you need to wait 15 minutes, and for the second - 3 minutes;
5. When finished, the pipe should be rinsed with water.

Gel Solvent Operation:

1. For one time, you will need 200-500 ml of gel, which must be poured into the drain hole;
2. After waiting 2-3 hours, it is worth flushing the pipeline with a large volume of water.

If the blockage is too strong, then you need to increase the period of action to six hours. When using a gel, it is worth remembering that it can react with nickel and chromium with prolonged contact.

The granular product is used as follows:

1. The drain hole must also be dry and clean;
2. Pour one and a half caps of granules inside the hole;
3. After the rash, this mass should be poured with cold water - 200 ml;
4. To clean it, wait 20 minutes, and then rinse the hole with water.

Chirton "Clean Drains" pipe cleaner can be used for prophylaxis once a month. If the drain hole has a large diameter, then a double dose can be used.

• affordable price;
• fast enough action;
• antibacterial;
• suitable agent for pipes made of any material;
• fight against rust;
• getting rid of a musty smell;
• economical.

• unpleasant odor on reaction;
• hard-to-find product;
• the need for hand protection.

Mr. Muscle

"Mr. Muscle ”is a suitable option when dealing with difficult to pass blockages. This tool copes with the obstruction of both the sewer and the drainpipe. For single use, one sachet of granules is provided with the required dose, which does not require additional measurement. The product can be used for prophylaxis.

The product contains caustic soda and alkalis, which penetrate deep into the blockage and actively fight pollution. During the reaction, oxygen is released, which "breaks" the mash.

Grease and soap deposits are submissive to the solvent, which allows operation for kitchen sinks and bathtubs. In addition, the musty odor disappears, and pipeline coatings are disinfected. This quality becomes an obstacle to the appearance of fungus and mold.

You need to apply the product as follows:

1. First of all, you need to make sure that the drain hole is completely dry;
2. The next thing is to pour the granular contents of the bag into the hole;
3. This mass should be poured with a glass of water at room temperature;
4. After 30 minutes, flush the pipe with plenty of water.

If necessary, you can repeat the cleaning process. For prophylaxis, once a month is enough.

• effective in action;
• fast reaction;
• antibacterial;
• fight against unpleasant odor;
• disinfection of the surface of sewer pipes;
• the ability to operate for any pipe material;
• availability in all stores;
• acceptable price.

• dangerous for the skin;
• does not always cope with the problem.

Bagi granules from clogging Pothan

Bagi anti-blockage granules Pothan is a pipe cleaner based on concentrated granules. This product is on the list of active chemical solvents used for tough blockages.

This option copes with paper, food, greasy and mucus residues in a short period of time - 3 minutes. It can be applied to pipes made of various materials without provoking a corrosive reaction and deformation.

In addition to removing blockages, the solvent removes unpleasant odors from the pipeline. With monthly maintenance, you can keep the sewer system in constant working order. However, for these purposes, it is better to buy cheaper gel options.

When using the product, you should adhere to some rules:

1. It is necessary to get rid of the liquid in the drain up to 5 cm down;
2. Pour the required volume of solvent into the dry hole (see instructions);
3. After waiting 3 minutes, it is worth pouring in 200 ml of hot water;
4. After 3 minutes, wash off with warm water.

The product is based on potent substances such as surfactants and caustic soda, which have a caustic effect and can form a persistent unpleasant odor.

• effective for complex blockages;
• fast reaction;
• getting rid of a musty smell;
• suitable option for pipes of any material;
• the presence of a blocker on the lid;
• convenient packaging;
• profitability.

• high price;
• regular use is aggressive for pipes;
• dangerous for the skin;
• acrid smell on reaction;
• unsafe composition;
• large packaging.

Solvent cost

№	Product name	Average cost (₽)
1	MOLE (1.2 L)	77
2	YPLON DRAIN CLEANER	145
3	DEBOUCHER	113
4	TIRET (1 L)	420
5	SANFOR	145
6	CHIRTON "CLEAN WATER" (60 GR.)	35
7	Mr. MUSCLE	87
8	BAGI "POTKHAN"	564

Problems with blockage of bathroom and kitchen pipes lead to discomfort, therefore it is necessary to carry out monthly preventive maintenance of the sewage system and drainage. If the obstruction appears, then you need to choose an effective remedy to get rid of the congestion and unpleasant odor. To do this, you should use the rating of the best pipe cleaning products in 2019. Attention! The above information is not a buying guide. For any advice, you should contact the specialists!