Rating of the best locker rooms for 2020

In gyms, aqua complexes, large trading houses, in most cases, it is necessary to organize a room where a person can change his uniform. The cabinets must be strong and reliable enough to withstand constant use and protect property. Therefore, they are made of thin metal.

Advantages and disadvantages

Whatever functions a metal cabinet performs, it has a lot of advantages:

1. Life time. Unlike chipboard furniture, the metal body is more resistant to various kinds of threats to integrity. Therefore, it has a long service life. In addition, metal tolerates high humidity more easily, for this reason, products made from it are indispensable in swimming pools and fitness centers.
2. Reliability. Metal facades and shelves cannot be damaged from impacts, chips and cracks do not appear on them.
3. Ease of assembly. Simplicity of installation is also important. In the event of a move, the ability to quickly dismantle is also considered an undoubted advantage.
4. Practicality. Shelves and doors are very easy to clean. Due to the fact that the structure is prefabricated, any part can be replaced with a new one if it has become unusable.
5. Environmental friendliness. When metal furniture is produced, various formaldehydes are not used, which give off harmful vapors.
6. Fire protection. Important documents, locked in a metal structure, will remain intact in the event of a fire in the building. Also, the wiring located in the distribution compartment will not be damaged.

In many ways, metal products are very good, but they also have disadvantages.

The first is a cold surface. This disadvantage is especially noticeable in winter, when it is necessary to store clothes in the boxes, and there is no heating in the room. If someone stores clothes in the garage during the cold season, it is better to put there things that family members are not going to wear.

The second minus is a small choice of colors. Most often, light gray products are on sale. This color is versatile and will easily fit into any interior. For those who prefer brighter colors, there is a simple solution - you just need to take a can of paint of a suitable shade and apply to the surface. When the interior design is close to the loft style, a metallic-colored product is the best option.

Varieties

Among the variety of metal products, prefabricated and all-welded ones can be distinguished. There are differences in the level of protection. Before buying, you should decide on the purpose of use, then it will be easier to make the right choice.

The most popular are the following types:

1. Wardrobes in which outerwear can be stored.Most often these are two-door options with a shelf for shoes and an upper mezzanine for hats. The clothes themselves are placed on hooks or hangers. There are small openings on the back surface and doors for ventilation.
2. Metal products, consisting of two sections, are in great demand in offices, sports and health centers, educational institutions. Practical and durable, the undressing unit fits perfectly into the loft style.
3. Shoe racks. Usually this is a narrow chest of drawers, consisting of several fold-out shelves, on which shoes are placed. Such options have several sections, the most common option is 3-4 sections.

This list is not closed, there are many other, no less interesting and demanded options. In addition, manufacturers offer tailor-made designs. For example, items for storing weapons are complemented by a safe. According to the purpose of use, drying, distribution and subscriber cabinets can be distinguished. On sale there is furniture made especially for equipping garages.

If the stores do not find a metal product that meets all the specified parameters, buyers should not despair. There are manufactures that can manufacture furniture according to individual parameters specified by the client. Some organizations buy entire storage rooms for changing rooms that combine several of the above modifications. For example, a garment storage structure can be fitted with a storage compartment and drawers or shelves for documents.

There are quite a few offers on the market for custom-made furniture. Before contacting a specific company, you should first study the reviews for it and inspect the finished copies made by the selected craftsmen. If they meet all the requirements, then metal structures will last a long time.

There are several types of metal locker cabinets:

1. Welded. Products of this type differ in the way they are assembled. They are done using spot welding. Such blocks are characterized by increased strength and have a very long service life. Welded products are installed assembled, their body is one-piece.
2. National teams. Products of this type can be transported both disassembled and in one piece. To save the monetary budget, it is more expedient to transport them disassembled. After the furniture has been brought to the site, it can be assembled using special elements that are part of the structure. The assembly is quite simple and does not require any special skills. If the products are brought to the site assembled, they can be used immediately.
3. Modular. Products of this type are transported only disassembled. The fact is that their design is made up of special sections that are attached to each other using separate fasteners. That is, one module is initially installed, another is attached to it, and so on.

In addition, the products differ from each other in the number of doors. Available with one or two doors. Bivalves are more convenient to use. Such products can be used by two people at once. Each door is locked separately with a key. Sometimes one person uses this box. Single-leaf is appropriate to use in places where there are a large number of people. They help save space. Such options are often used in schools. Each person who uses such a box has his own individual key.

Almost all doors open completely. In addition, they contain special openings that are responsible for ventilation of the compartments. Such openings must necessarily be in the lockers that are installed in the locker rooms of sports sections and at enterprises in household premises. If there is no ventilation in the products, the clothes that are in them can begin to grow moldy.

As a rule, in this kind of furniture there is a section on top, which provides for the placement of various small accessories or shoes there. Under it is a clothes bar. On the sides there are hooks for clothes. The bottom of the drawer is strong, designed for heavy objects. Sometimes there are hooks on the door.

It is better to store clothes separately, top and main ones are better in different places. More convenient for use are double doors. They allow you to store work clothes and everyday clothes in separate compartments. Furniture doors are durable and allow you to place towels and other things on them.

The main purpose of use is to keep things safe and tidy. Because of this, the space in the box should be used extremely rationally, there is no need to litter the product. Things that are not needed are best taken away.

If lockers are ordered for workers in production, be sure to take care of the storage space for replacement shoes. You can order special boxes with an additional compartment. In addition, perforated doors should be used.

Most often, cabinets are elongated in the form of a pencil case. The height reaches 2 meters, the width is up to 1 meter, and the depth is 0.5 meters. Weight can be different, some varieties reach about 80 kg.
The height is about 2 meters so that the outerwear can be placed at full height. Weight is different due to different material used. The thickness of the iron can also be very different.

In the changing rooms used in childcare facilities, pencil cases of lower height are used. This is so that children can easily reach the upper compartments. In addition, products of different colors are made so that kids can better remember their places in the locker rooms. Some pencil cases have beautiful designs.

Various types of locks are used to close the doors. These can be mortise locks, padlocks, or electronic devices.

The padlock is the most inconvenient. It is rarely used, usually to close doors for a long time. For use in work changing rooms, it is hardly ever used. Locks like this are also rarely used in sports locker rooms.

Mortise locks, as a rule, have a transom version of the larva. Such a valve is quite convenient, but very unreliable. The striker plate in this version of the lock goes beyond the door wall. Such a lock can be opened quite easily.

Recently, electronic locking elements are becoming more and more popular. These locks can be moved from one cabinet to another quite easily. Electronic locks are opened using a special key card. These cards are brought to the reader, from where the signal for constipation comes. Locks of this type are good in that they cannot be opened without a special card. Each key is strictly individual, which protects the owner's personal belongings from being opened by other people.

How to choose and place correctly

In locker rooms, sectional cabinets are often used. When choosing the best option, you need to take into account some of the nuances:

1. The box should be in harmony with the main furniture. The location should also be considered. For children's institutions, the most preferable option for undressing booths made of chipboard or wood. In rooms where the humidity is higher, it is better to choose metal or plastic products.
2. The undressing equipment must be of a certain degree of protection, that is, the locks or locking devices must be of high quality to ensure the safety of its contents.
3. The dimensions of the product are pre-measured in order to be sure that the cabinet will fit exactly in the changing room.
4. The undressing booths must be of high quality, free from defects and damage. They pay particular attention to this when choosing furniture for children's institutions.

It is also necessary to take into account the level of convenience of storing things in the locker room. Depending on the functionality, the booths are equipped accordingly: shelves for folded items or crossbars for outerwear. At enterprises, they prefer models consisting of two sections: for changeable work clothes and casual.

In preschool institutions, samples of bright colors should be installed, with dimensions corresponding to the age of the kids. So that they can freely hang up and get their things on their own. Chipboard wardrobes are used to decorate locker rooms in schools. They should be convenient for storing textbooks and personal belongings of a student.

There are certain requirements for the installation and location of the undressing booths. If they are located in an L-shaped form, then the doors should be at such a distance that they can be freely opened and closed. Various options for the arrangement of the undressing booths are possible. Dimensions are chosen depending on their location and locker room area.

The traditional arrangement can be of two types:

1. Two-piece models are installed along the walls of the dressing room.
2. Modular cabins are assembled and installed directly in the changing room to form a single structure.

Price

When choosing a closet for storing clothes in the locker room, you will notice that prices sometimes differ greatly from each other. This is due to many factors. The cost of the product is influenced by the material, type, model, and the complexity of the design. Standard options for metal booths are less expensive. Cabinets with increased capacity, additional equipment, larger dimensions will have a much higher cost.

The price formation is also influenced by the thickness of the metal sheet from which the cabinet is made. Products made from thinner steel elements can easily deform and become damaged during transport. The cost of such booths will be much lower than that of thick-walled ones. To ensure the required strength and resistance to damage, the steel sheet should not be thinner than 0.7 mm.

The cost of the cabinet also depends on the type of product coverage. The product, the surface of which is coated with enamel, has a lower cost than a similar product painted with powder paint. Powder paints are by far the most popular due to their high resistance to damage of various kinds. With a careful attitude and careful care, metal cabinets with such a coating can last a long time.

When choosing locker room furniture, do not neglect the advice of a specialist and be sure to take all of the above into account.

Rating of the best cabinets in 2020

Monolithic

Practitioner Standard LS - 01

The dressing room on an iron base and with a metal frame is equipped with a door, a lock with a set of keys, a compartment for men's and women's head accessories, a bar for hangers, hooks, holes that create air circulation. The furniture in question creates convenience during the storage of clothing items by visitors to sports sections, in various industries and similar similar premises, helping to keep things and items in proper order.

• fastening is carried out with screw-in screws and furniture fittings;
• the Praktik castle has 2000 combinations;
• ventilation and airing;
• the design promotes rack alignment;
• collapsible delivery;
• Opportunities: PL lock (the possibility of replacing the key with a Euro - locks A 129 keyless lock with a padlocking system). Shoe shelf, door painting in different shades, present in the catalog offered by the manufacturer (when ordering from 50 pcs.)

• not found.

Strengthened practitioner ML 01 - 30

Designed for the safety of things indoors in production, during sports. Creates the convenience and safety of household equipment, like storage rooms.An improved ventilation system has been introduced. One of the few in Russia, the depth of which is up to 600 mm, allows you to distribute garments with hangers.
The set includes key locks of German production with increased secrecy. The probability of identical locks is minimally reduced. The closing system will prevent accidental opening from impact. Several cabinets can be fastened together.

• reinforcement of the rigid body with a welded frame;
• vertical assembly, hooks and rivets are used;
• key lock "Praktik" with 2000 thousand combinations;
• ventilation is located in the rear wall and on the doors;
• The modular system of lockers allows the models to be arranged in a row;
• easily fastened;
• it was conceived to build up sections in a row due to the side wall Model Compatibility;
• doors can be changed with opening to the right and left;
• the kit consists of a crossbar, shelf and hooks;
• view - disassembled.

• not found.

Practitioner AL - 004 (additional sectional attachment)

A side cabinet is a dressing room without a side wall. It is an added sectional element and is used in conjunction with a solid piece of furniture. Four-door version with installation in a single section. The best sample made by Russian craftsmen, which is made for storing changeable work clothes in workshops and storerooms, sports facilities and similar premises. Quite reliable quality with excellent depth, different from similar examples.

• has a quality certificate;
• the capacity of clothes hangers;
• air circulation;
• the set includes hinges for a padlock and a Praktik key lock with 2000 thousand combinations;
• fastening together, the possibility of reducing the cost through the use of attached sections;
• unassembled type of delivery.

• not found.

NOBILIS anti-vandal NLH - 01

The reinforced base model ML 12–30 is a cabinet made of metal designed to keep items and belongings in good condition. The use is suitable for dressing in premises of various industries, gyms.

Manufacturers have equipped it with comfortable shelves, slats for accommodating hangers, horns and information frames, hygiene is maintained by airing through neat openings. Before directly applying any shade, the products undergo a procedure that excludes the appearance of chips as a result of improper transportation. A gentle base is used that does not allow the appearance of cracks and scratches.

The compartmentalized design allows for easy bonding between dressing rooms as well as proper distribution of space. Delivery of products is carried out disassembled. Attractive product design combined with high operational functionality is noted.

• reliable steel structure with wall thickness up to 1 mm;
• ventilated slots for hygiene;
• shelves, partitions, horns, hanger capacity and text screensavers;
• key lock Euro luxury from German manufacturers, endowed with increased secrecy and 10,000 thousand variations;
• the doors are locked by means of special pins (crossbars), consisting of stainless steel;
• compulsory treatment before coating, which increases the strength of the painted surface, excluding visible damage. Unusual addition of crushed powder resistant to defects and abrasions;
• the mechanism of the device allows the connection of racks.

• not found.

Prefabricated

SHREK-21-530

This model is notable for its affordable price and special durability. It is made of metal, has a simple structure and is easy to use. Despite its low cost, this cabinet will delight you with its quality. It will perfectly fulfill its functions and will serve for a long time. However, high quality is not the only plus.It has an attractive appearance, thanks to the bright doors that contrast with the body. This allows them to be installed in any room:

• in the office;
• in a warehouse;
• in the utility room;
• in the production area;
• in the gym locker room and many other places.

During the manufacture of SHREK 21-530, high quality metal is used and automated technologies are used. The all-welded front panel makes the structure solid and durable, and the doors are reinforced with stiffeners. This model of wardrobe consists of two compartments, which are complemented by a shelf for storing hats, and are closed by one hinged door. The door and the body have ventilation holes, which allows you to store not only dry but also damp clothes.

The manufacturer transports the cabinet disassembled, packed in corrugated cardboard. For assembly, you will need a riveter, the structure is assembled using special rivets made of metal.

The manufacturer can, at the request of the buyer, supplement the standard set with a shelf for storing shoes, special high-security locks, hinges that allow you to close the cabinet with a padlock, and a bolt system.

• it is possible to supplement the design with the necessary functionality;
• the construction is solid and durable.

• not found.

ShRK-22-600

This metal cabinet is divided into two sections. Like the previous model, it has a prefabricated structure that is assembled using special rivets made of durable metal. The buyer can choose in what form the product will be delivered to him - assembled or disassembled. Each section has an individual lock with a key and is equipped with a bar used for hangers.

There is a holder for a license plate on the door. The case has additional protection in the form of a wear-resistant coating made of completely safe materials.

• durable metal;
• assembling the structure is quite simple.

• not found.

MF-4 three-section

The model will be an excellent solution if the storage space for clothes should take up the minimum amount of space in the room.

The product has three sections, each of which is closed by a separate door. Each section is designed to store one person's belongings. On request, they can be supplemented with locks. The model is made of Austrian chipboard, the thickness of which is 16 mm. At the request of the buyer, a moisture-resistant material can be used for the manufacture of the structure. This allows this model to be used even in rooms with high humidity.

• compactness, the model does not take up much space;
• strength, high strength and can support the weight of 4 people;
• appearance, has a neat and attractive appearance;
• long service life, the manufacturer claims that this model is capable of serving at least 10 years;
• 175 color schemes;
• safety of materials, made of environmentally friendly materials that are not capable of harming human health.

• not found.

Modular

Practitioner ML-14-30 basic module S23099441102

This model is great for changing rooms or storage rooms. It can also be used in gyms, schools, supermarkets and businesses.

• coating, powder paint is used as a coating, which protects the surface from various kinds of damage;
• the lock is particularly reliable.
• the case is quite compact and can accommodate a large number of things.

• not found.

ML 04-30

This model is used for storing things in many rooms and has its own characteristics.

• the cabinet has an additional section;
• there is no side wall;
• the set includes shelves, hooks and a bar for hangers;
• the presence of a key lock on each section;
• solid body;
• the presence of ventilation holes;
• the ability to line up any combination of models;
• the ability to install the door from either side.

• not found.

Furniture in the changing room used for storing personal belongings, books, textbooks, work and everyday clothes should be comfortable, beautiful and reliable. The choice of undressing booths must be approached responsibly.