Ranking of the best medical beds for 2020

No medical institution can do without high-quality and functional medical beds. Most modern models are equipped with an electric drive, cardio chair and other necessary devices. Most of them consist of several sections, the number of which depends on the model in question and the designated functions. A feature is also considered the presence of sanitary equipment, which will not be superfluous. It is used both for the care of the elderly and those undergoing treatment.

How to choose

In order not to be mistaken when choosing, you should understand several aspects, among which the purpose of the purchase takes a special place. You should also pay attention to the degree of human mobility. The lower this figure, the more technical characteristics the popular model should be equipped with. Perhaps the choice will fall on 2-crank designs equipped with multiple levers. Electric models will help sedentary people stand up or sit without assistance.

An important aspect is the duration of the use of the product. The best choice would be an electric bed for those people who spend 15 hours or more in bed (during the day). Manual or mechanical products are used for more mobile people who do not need to spend the whole day in bed. The total weight of the patient deserves special attention, as well as his height. Furniture should be selected for each person individually. A design that is too wide or too long will not give comfort, and besides, getting up from it without assistance will be problematic.

It is worth noting that a high-quality mattress is rarely offered in the kit. Such products should be purchased only with the approval of the attending physician and taking into account the existing diagnosis. Also, it will not be superfluous to stock up on waterproof sheets and other accessories.

Types and design features

Without exception, all hospital beds have a manual or automatic adjustment function. The types of devices are divided depending on the available settings and their number:

Construction type	Description
Low	The basic equipment allows you to adjust the area of ​​the legs and head. The bed's profile is low and designed so that the patient can sit only 5 cm from the floor. The height can be adjusted, but not upwards. Such products are used if the risk of a patient falling during sleep is extremely high, as well as if the patient seeks to increase activity and needs to get out of bed on his own. The lower models are fully automated and electrically powered.
Mechanical	All the necessary manipulations regarding the adjustment of the position of the bed are carried out manually. The most affordable type of construction due to the absence of the need for a network connection.When choosing such a device for the home, you need to find a physically strong and resilient nurse.
Bariatric	According to buyers, the choice in favor of such a design is obvious. The product is designed for patients with large body weight. Such models belong to the category of fully automated electric beds. The weight capacity is much higher in comparison with similar furniture from the best world manufacturers. Heavy mattresses are custom made and have a large coverage area. Such products are expensive, so the range is not particularly wide.
Semi-electric	The principle of operation coincides with the new model of electric beds and hospital beds. The only difference is the need to manually adjust the height of the product by means of the side handle. It will take a lot of effort on the part of the caregiver to set the mechanism in motion. This aspect has a beneficial effect on the final cost of the product.
Electrical	Equipped with an electronic power supply system. These are 3- or 4-section models in which the area of ​​the legs and head is regulated. The frame height is also exposed. Electric beds allow the patient to adjust their own position independently using the control panel. The design is not only approved by the Ministry of Health, but also has the appropriate quality certificates. In addition, remote control is allowed, in which only the nurse will use the settings. The corrections used make it possible to exclude any physical activity.

Rating of quality electric medical beds

ARMED RS-301

This is an automated and inexpensive popular novelty of a well-known Russian manufacturer. The design is equipped with a comfortable handle. The customer can choose from a bed with half and full-length rails, which make it possible to remove the patient from the product as conveniently as possible. It is a great choice for home use. However, care should be taken to have 2 mattresses with additional waterproof covers. The end panels are made of metal, but painted in a wood look, which only adds comfort. All this allows you to make the bedroom as comfortable and familiar as possible for the patient.

The height is set in the range of 30-50 cm, which makes the application as comfortable as possible. A back-up battery is included to help keep you comfortable even during rolling blackouts. The panels are resistant to mechanical damage. The review showed that the headboard is quite high. If necessary, the product can be transported to another location.

Average price - 47,000 rubles.

• suitable for home use;
• numerous favorable reviews;
• high headboard;
• modern design;
• convenient location of the control panel;
• backup power supply;
• the possibility of convenient transportation to other premises;
• high assembly reliability;
• can be ordered online.

• not identified.

DB-11A MET Revel

Of the entire rating, it is this model that least of all resembles a familiar hospital bed. It is made in several sizes, so loved ones can sleep in the same bed with the patient. The Split King option deserves special attention, which allows you to adjust the sides separately. In addition, one side can be removed altogether, while the other remains raised. Thus, the patient can be accommodated with increased comfort. The maximum weight is 200 kg. Dimensions: 90x200 cm. This model belongs to the category of semi-electrical products.

The purchase will cost 67,000 rubles.

• the presence of several built-in USB charging ports;
• convenient control panel;
• the ability to program individual positions;
• flashlight for reading;
• long service life;
• high assembly reliability;
• manufacturer's warranty: 10 years.

• lack of height adjustment;
• requires the purchase of a one-piece transparent mattress;
• rails are not provided.

DHС FH-2

The bed for medical institutions is classified as semi-electric. This aspect is extremely important if it is planned to change the location of the patient during his rest or if the person is extremely sensitive to extraneous noise. This is a 2-section design with increased comfort. A mechanical handle (lever) is located on the side element, with the help of which the nurse will have to manually change the position of individual elements of the product. The popular model cannot be used for resuscitation, but it is suitable for home use. The height of the bed is fixed within 40-85 cm.

The position of the legs and head can be adjusted separately or simultaneously, depending on the preference of the recumbent. In addition to the high-quality drive, the backup generator (9 V), which is supplied in the kit, deserves special attention. The brand assures that installation and assembly does not take a lot of time, moreover, no accessories are required. Key elements 5. They need to be fastened together. Regardless of the configuration, the mattress will have to be purchased separately.

It can be purchased at a price of 76,000 rubles.

• permissible load - 500 kg;
• dimensions: 106x223 cm;
• electric model;
• functional device;
• the ability to adjust individual elements;
• made of high quality materials;
• suitable for general hospital wards.

• lack of mattresses included;
• high price.

MET EMET (15988)

The dimensions of the bed are 90x197 cm. The model is equipped with a full-fledged electric drive. The presence of a toilet device should be noted. If necessary, you can purchase a set with a removable table. The set also includes 2 special mattresses that prevent the formation of pressure sores.

This bed is designed to fully care for:

• bedridden patients;
• patients in the postoperative period;
• older people.

It is a wonderful Chinese product that can facilitate caring for people with disabilities. With such a product, rehabilitation will be more comfortable. This model provides the correct physiological position due to the presence of an anti-tendelenburg angle, which facilitates not only patient recovery, but also the examination process. The design consists of 4 sections, controlled by a remote control, which is conveniently fixed to the wall of the bed.

Externally, the design is no different from a home bed, so it will perfectly fit into any interior. In this way, a difficult moral situation will be avoided. Due to the designated functionality, the surface can take the form of a cardio chair. This will help to use the product during the recovery period after a heart attack. Experts advise families with family members with limited activity to purchase the model. This bed allows them to use the remote control on their own and make their stay as comfortable as possible. The ears or sides can rotate.

You can buy at a price of 60,000 rubles.

• anti-decubitus mattress;
• the set includes a pull-up bar, a bath for shampooing, an infusion stand and a side table;
• remote control with backlit buttons;
• toilet device with a mechanical drive;
• folding side rails made of aluminum;
• two independent electric drives;
• Impact resistant epoxy coated steel construction.

• not identified.

MED-MOS 3-93

It is this popular model that is best bought if there is a person in the family who is bedridden. With the help of this device, the patient will have the opportunity to partially or completely abandon the attendants and nurses, which is the main selection criterion for some families.This was achieved through the use of a motorized drive for the toilet device, which is controlled by a remote control.

For the manufacture of the frame, high-strength steel is used, which is covered with a protective layer based on a powder coating. The product consists of 3 sections, each of which is regulated by an electric drive and a remote control. For the manufacture of the backrest, laminated MDF was used. The bed does not belong to the budget category.

Average cost - 79,000 rubles.

• maximum load 200 kg;
• the ability to adjust individual sections;
• ease of assembly;
• does not need special care;
• low weight of the product;
• aluminum frame;
• parking clips;
• the possibility of self-service;
• comfort of being;
• Remote Control.

• the hip area is not regulated;
• it is recommended to additionally purchase an anti-decubitus mattress.

Burmeier economic ii

This is an excellent solution for quality care for sick people both at home and in a hospital. This is the optimal model designed for people who, due to their physical capabilities, are not able to constantly stay in good health and are forced to lie down constantly. In addition to the high level of comfort, the high degree of reliability of the device should also be noted. The structure consists of 4 sections, the adjustment of which is carried out in automatic mode by means of the control panel. The set includes leg, hip, intermediate and back sections.

Wooden slats, which are attached to the frame, act as a base. This made it possible to achieve the much-needed orthopedic effect. The height is adjusted on a case-by-case basis. The permissible range is 40-80 cm. It should be noted that individual elements can be adjusted, which makes the treatment of a person more comfortable.

Cost - 72,000 rubles.

• there is an arc that will help the patient to pull himself up;
• the wheels are fixed;
• depending on the diagnosis, the doctor or nurse may block a number of keys;
• side rails are made of beech and equipped with guide rails;
• the set includes a polyurethane mattress, which will make the patient's bed rest less depressing;
• the relief of the surface of the bed is adjusted by the patient using a convenient control panel.

• there is no toilet, so you cannot do without service personnel.

Rating of quality mechanical medical beds

MedMos F-8 MM-07

This is a mechanical device, consisting of 4 sections independent of each other. Movable 2 - foot and head. For medical staff, this is one of the most acceptable options due to the use of easily removable backs and movable side rails. The nurse can approach the bed from either side. The bed, if necessary, can be used as a wheelchair due to the installed caster wheels, each of which is equipped with brakes. High strength end backrests have a beneficial effect on the overall reliability. High-strength stainless steel is used for manufacturing.

Cost - 18,000 rubles.

• acceptable combination of cost and quality;
• access to the patient is possible from any side;
• used as a gurney.

• not identified.

Belberg YG-6 (MM41)

This model is often recommended due to the presence of the cardio seat function. It should also be noted that there is a built-in toilet, which is a feature of the selected device. If necessary, the structure can be easily converted into a comfortable chair, which makes it possible to quickly change the patient's position from horizontal to vertical. Such manipulations help to improve blood circulation in order to avoid the manifestation of pressure ulcers. An excellent solution in case you had to face such problems:

• In the presence of weak physical activity of a person who is unable to provide adequate care.
• A great solution for people who are not recommended to be moved, even with a wheelchair.
• Provided that a person spends most of the day in a supine position, regardless of the diagnosis.

Price - 30,000 rubles.

• all necessary toilet accessories are available;
• auxiliary accessories;
• long service life;
• increased comfort;
• acceptable cost;
• equipped with a cardio seat function.

• it is difficult to choose an anti-decubitus mattress due to the design features of the model.

Armed RS105-B

For several years in a row, this popular model topped the ratings of the best-selling medical products for home use on the Russian market. The functionality of the device accommodates the necessary functions that can satisfy the needs of any patient. In addition, we are talking about the difficulties that caregivers could face. They were avoided by using a well thought-out device.

The model is intended for patients who, due to the circumstances or the diagnosis, have retained physical activity and do not need to use additional and expensive devices. Among these, accessories that allow people to roll over, as well as a toilet. It should also be noted and the possibility of additional equipment. If necessary, you can install side restraints, a table, weights for tightening the body.

Cost - 26,000 rubles.

• time-tested mechanical device;
• affordable price;
• the ability to supplement and install auxiliary components.

• not identified.

Medicinoff A-3

The functionality of the medical device is rather limited, which affected the final cost. The brand is known not only in Russia, but also in the CIS, largely due to its affordable cost. This pattern is common in healthcare settings. There are no side restraints here, so it can only be used if the patient does not need them. A pull-up rack is also not provided. This bed is used if the patient has been admitted for a short period of rehabilitation and has maintained sufficient physical activity.

Average price - 17,000 rubles.

• acceptable price;
• rich functionality;
• the ability to install additional accessories;
• excellent durability;
• high assembly reliability;
• long service life.

• not identified.

Med-Mos E-8

This medical device consists of 4 sections, which are adjustable by means of a screw mechanism and a mechanical lever. They are placed under the bed, in the area of ​​the legs. For the manufacture of the frame, profiled cold-rolled steel was used. On top there is a protective layer based on epoxy enamel. Castors are installed, which are equipped with parking-type clamps. Additionally, the model is equipped with shockproof bumpers. End wooden fences were opened with varnish.

Average cost - 29,000 rubles.

• there is a drain for a dropper that can be adjusted;
• the presence of auxiliary suspension elements;
• side rails are installed at will, which allows access to the patient from any side;
• each wheel is equipped with a brake;
• self-orienting wheelbase;
• all metal elements are covered with epoxy enamel;
• ease of care;
• infusion arc and rack.

• there is no possibility of independent change in the position of a patient with limited activity;
• sectional mattress is purchased separately;
• service personnel is required.

Armed RS106-B

It is a medical device that consists of 4 sections. The height is manually adjustable using pre-installed joints and a movable platform.This is a good solution for elderly people who have to be under constant supervision of medical personnel, as well as people who are recovering in the postoperative period. The bed can also be used to treat and care for the elderly.

There is a possibility of adjusting the surface relief in the area of ​​the hip and head section. Tilt adjustment with subsequent fixation is allowed. For the manufacture of the product, durable and at the same time lightweight materials are used, such as high-quality epoxy base and enamel. It is characterized by ease of use and increased comfort. The bed is strong and reliable.

Price - 41,000 rubles.

• there is an increased resistance to disinfectants and agents of all parts without exception;
• anti-traumatic bumpers for the leg and head back;
• the basic set includes additional side rails, which are equipped with a folding system;
• decorative inserts made under a tree;
• high-strength frame made of steel profiles;
• self-orienting rollers;
• fixation of wheels.

• uncomfortable location of the hip section (much will depend on the height and angle of inclination);
• metal end fences.

Armed RS105-A

A medical device will provide the patient with proper care, regardless of the place of treatment. Suitable for both home use and hospitals. It is based on the use of a high-strength steel frame. The protective coating is an epoxy resin that belongs to the category of environmentally friendly and completely safe materials. The back is removable. The set also includes bumpers that will protect you from injury. Consists of 4 sections, which require a lever and some physical strength to adjust. The comb is used to adjust the ankle section. The wheels have brakes. Regular treatment of the structure with antibacterial and disinfectant compounds is allowed.

Price - RUB 25,000

• the berth is made of perforated steel elements;
• there are recesses for the boat and hooks for accessories;
• maximum lifting capacity: 250 kg;
• tilt angle is adjustable.

• the mattress is purchased separately.

Conclusion

A medical bed is an irreplaceable piece of furniture that has been designed specifically for people in need of medical care. After being injured or due to serious illness, some patients may be partially or completely unable to move. In addition, one should not forget about the comfort of the patient himself.

Nursing staff must have 100% access to the patient's bed from each side. It will not be superfluous to purchase a model with removable sides. The main thing that should be in the design is the function of adjusting the height of the legs and head. For greater convenience, preference should be given to electric models, for which a special control panel is used.