Rating of the best bathroom sealants for 2020

Now many are thinking about repairing with their own hands, because this makes it possible to save a lot, moreover, it is nice to know that everything around was done with his own hands. And due to the fact that the bathroom is saturated with constant moisture, the sealant must be of very high quality and reliable. An equally important factor is the presence of useful properties, resistance to temperature changes and further service life. All this is influenced by various qualities, each of which should be taken into account when choosing a tool, because now there are a huge number of them, which makes the choice very difficult. Each manufacturer will praise his product and point out only its advantages, however, each product has a reverse side of the coin, which is not customary to talk about.

How to make the right choice?

The type of work is the first thing you need to decide on before choosing a specific product. For the bathroom, sealing is an excellent solution. It is known that the wet zone is a favorable place for the growth of fungal bacteria. Thanks to the sealant, you can close all the cracks where water often flows. This will contribute to the elimination of a microclimate favorable for the growth of unwanted microorganisms.

When choosing, the greatest attention should be paid to the following characteristics:

1. How strongly the material and surface adhere to each other. In this case, it allows you to see after what time the substance will begin to exfoliate from the surface.
2. Suitability of the sealant under different storage conditions. This takes into account the ability to retain properties at any temperature.
3. Stretching ability. This refers to the maximum length that a substance can stretch before breaking.
4. Drying of the sealant after complete drying. The material should not shrink too much.

Based on common features, the likelihood of choosing with the maximum benefit for yourself increases. However, for a clearer idea of ​​each species, it is worth considering separately all the qualities in more detail.

Types of sealants and the range of their work

Different species have different properties.

Acrylic

Such formulations are the cheapest, but this does not mean that they are of poor quality.

• There are no harmful toxic components in the composition;
• Are chemically neutral;
• They have excellent adhesion to almost any type of surface;
• Preservation of properties and condition at temperatures from -20 ° C to + 80 ° C;
• Resistant to long-term vibrations that do not have too large amplitude;
• Drying takes a short period of time;
• The dried surface lends itself well to staining or varnishing.

At such a low cost, these qualities are amazing. The main advantage is the harmlessness of the substances. This allows you not to purchase additional protective equipment, and the short time it takes for the agent to dry significantly speeds up the work process.

• Shrinkage during drying;
• Change from white to yellow over time.

The first drawback contributes to the fact that when water enters the seam, it begins to leak. Therefore, such a sealant is best used where the moisture level is minimized. A surface primer is also required. This increases the reliability of the seam and its resistance to leaks.

The second indicates that it is better to stock up on colored products or transparent ones. Color changes will not be noticeable on them.

Application area

An important nuance of sealed seams is their rigidity., Because of what they burst, so the use for metal equipment is not suitable. The load contributes to a change in their size, so an elastic seam is required for this.

Mainly used for filling unnecessary holes and cracks in building surfaces; connection of various elements that do not have high mobility; protection of bathroom furniture, areas of which are subject to harmful effects.

It is worth remembering that when interacting with a liquid, a seam made of an acrylic agent becomes useless, which is why various kinds of bacteria actively multiply there. Although the composition of the product includes antiseptic substances, however, with constant contact with water, they become insufficient. Therefore, it is better to strenuously avoid using acrylic sealants in places with high humidity.

However, if the buyer is not satisfied with the instability of acrylic sealant to water, then he can find a product with special additives that will make it much more effective.

Silicone

Such a sealing compound is one of the most common, in addition, it is available in two types of media: acidic and neutral. The price of the former is much lower and it is much easier to work with them, but indoors there is a risk of poisoning, because they give off a toxic odor until completely dry. It should also be borne in mind that this type is not suitable for applying to metal, because it immediately oxidizes.

The area of ​​application of neutral sealants is expanding due to the fact that they do not react with metal. Nevertheless, their cost is higher and it is much more difficult to work with them.

Both types of sealant media may or may not be waterproof. They are also divided into one-component and two-component. For home use, use the first option, because it is not necessary to mix the compositions before starting work.

Scope and properties

This type of sealant has a large number of properties and a wide range of applications.

• Has excellent adhesive ability;
• Used for joining glass and non-porous building materials;
• When installing drainpipes and working with drywall, it is an excellent assistant;
• It is used at high temperatures due to its resistance to them;
• Moisture resistant are well suited for bathroom joints and do not deteriorate when exposed to water.

The main advantage of the silicone sealant is the elasticity of the resulting seams. They are not subject to any influences, so there is no chance that the seams can crack. However, the material does not contain antibacterial substances in its composition, which increases the risk of fungus and other bacteria. However, there are silicone sealants with special additives that eliminate this disadvantage.

Polyurethane

It makes sense to use this type of tool outside buildings. It is resistant to UV rays or other weathering agents. Nevertheless, they are equally effective in damp rooms. This is due to their good adhesive properties.

Properties and scope

Such substances can be used on streets where the temperature is at least -10 ° C.

• Elasticity of the dried material;
• Moisture tolerance;
• The absence of any deformation after complete drying;
• Excellent adhesion to any type of coating;
• Most brands are stainable after drying.

• When working with plastics, the seam strength is very low;
• Recommended to be applied on completely dry surfaces, otherwise additional primer is required;
• Intolerance to temperatures above + 120 ° C;
• Do not use when installing acrylic products, because there is a high probability that the seams will leak.

Polyurethane sealants are mainly classified as general construction. They are often used for sealing joints in homes and similar jobs.

Sealants with MS polymers

They appeared quite recently, but they are quickly gaining popularity among all types of work, regardless of the level and complexity. This is due to the fact that the product combines the best qualities of silicone and polyurethane sealants. Thus, the seam is not only reliable, but also has incredible elasticity, which makes it almost perfect.

Properties and scope

The main advantage of such sealants is that an excellent adhesive ability is added to all other advantages.

• There is no need to use primers, because the material has an excellent combination with all surfaces;
• Do not contain harmful additives, do not have unpleasant odors;
• Have a high drying rate even at subzero temperatures;
• Even completely dry seams are striking in their elasticity;
• Provide the ability to paint after complete drying;
• Not influenced by ultraviolet radiation;
• They have a high level of water resistance, in addition, they can be used in both salt and fresh water;
• Easy to handle, will not crack over time.

• High cost, although justified;
• There is a possibility that after some time the seam surface will turn yellow;
• The seam can only be removed mechanically, because the composition is not subject to chemical influences.

Although the tool has appeared recently, however, there is already a huge amount of goods, which makes it possible to choose according to your taste.

Types of packages

Repair work leads to the fact that workers are purchased by various improvised means, including hermetic ones. They help to avoid fluid leakage into tight spaces. Also, it is often necessary to fill in the cracks in the wall in order to avoid their dampness. The selection should be based on knowledge of the types of sealants, as well as their uses and the functions they perform. The purpose of the sealant should be directly related to the direction of work. In addition, you should pay attention to the release form. In stores, the product has the following appearance:

• Standard tube with tapered tip. Its mass is within 60 - 100 grams. This type is useful when you need to purchase a small amount of material. However, an even strip will not come out of such a tube, so there is a need for wiping and leveling.
• Tubes made for a construction gun. Available in varying volumes: from 280 to 320 ml and from 500 to 600 ml. Working with them is much more comfortable and practical than with tubes, but you still have to adjust the application of the substance.
• Packing in an aluminum tube (sausage), buckets of various capacities and barrels. They are purchased mainly by professional builders. have a large volume, and therefore are intended for constant use in large quantities. For this reason, it makes no sense to purchase them for domestic purposes.

Hence the conclusion that the most convenient and effective type will be a tube for a construction gun. This is a great solution for independent work.

Rating of the best bathroom products

1.Tytan Professional

It is one of the most resistant substances to fungi and mold. It is used in rooms with maximum high humidity.

• The base silicone polymer has a neutral cooling system;
• After 10-20 minutes, a film forms. However, for this, certain conditions must be observed: the humidity should be 50%, and the temperature should be 23 degrees.
• Curing occurs 2 millimeters per day, but this requires compliance with all the same conditions.
• Preservation of properties and condition at temperatures between -40 and +100 degrees;
• According to the Shore scale, the hardness is A-22;
• Made in accordance with all standards;
• Low price: from 150 rubles.

• Small shelf life - up to a year;
• It is necessary to create special conditions to obtain a good result;
• Low elongation at break of only 100%.

This tool can be used not only for acrylic bathtubs, but also for plastic ones, including PVC.

An important feature is the fact that this sealant does not cause discoloration of acrylic and does not negatively affect the environment. After hardening, it is exposed only to specialized chemicals and detergents. The special ingredients in the composition have a detrimental effect on the cells of mold and fungus, killing them.

2. Moment

Has a wide range of uses: from kitchens to bath complexes. It is often used in shipbuilding, which once again proves its reliability. The composition also includes special components that prevent the growth of fungi and mold, but do not harm human health when interacting with them.

• Silicone base with acetate system;
• A film coating forms within 15 minutes;
• Curing speed - 2 millimeters per day;
• Preservation of properties and condition at temperatures from -40 to +150 degrees;
• On the Shore scale, the hardness is 20;
• Elongation at break is 450%;
• Expiration date - up to 18 months;
• Made in accordance with all standards;
• According to Yandex Market data, the price ranges from 150 to 2140 rubles.

• Some types are too expensive.

The service life of this product is incredibly long, which is facilitated by the minimum amount of various additives and a carefully measured composition balance.

It has excellent adhesion to a wide variety of surfaces. Perfectly combats the harmful effects of the environment.

3. Ceresit CS24

It is used for sealing joints in rooms with high humidity. It is possible to use it without a primer. It has excellent quality for both indoor and outdoor use. However, it is not suitable for areas that are constantly in abundant moisture.

• Has a silicone base;
• Preservation of properties and condition at temperatures from -40 to +120 degrees Celsius;
• Made in two colors: white and transparent;
• Made in accordance with all standards;
• The base price on Yandex Market is 200 rubles.

• Complete hardening occurs after two days.

4. CIKI FIX universal

Resistant to harmful atmospheric influences, as well as to detergents. It has excellent adhesion to all types of surfaces, including painted ones.

• Has a silicone and acid base;
• Final hardening occurs after 15-20 minutes;
• Preservation of properties and condition at temperatures from -40 to +180 degrees;
• Shore's hardness is 18;
• Elongation at break is 150-200%;
• Made in two colors: white and transparent;
• Made in accordance with all standards;
• According to information from Yandex Market, the base price is 150 rubles.

• The composition does not include an additive that removes fungi and mold, which significantly reduces the range of application of the product to buildings with excellent ventilation.

5. Belinka Belsil Sanitary Acetate

The substance is widely used in sealing various materials. The composition includes components that fight fungal formations. Hardens from atmospheric moisture.

• Created on a silicone base;
• Preservation of properties and condition at temperatures from +5 to +300 degrees;
• Made in accordance with all standards;
• According to data from Yandex Market, its price varies from 500 to 1180 rubles.

• Low curing rate - 1 millimeter per day;
• Not resistant to negative temperatures.

6. Dow Corning 7091

This material is a common adhesive sealant, but it is highly effective when used in relation to any material.

• Created on a silicone base;
• Complete hardening occurs after 28 minutes;
• Elongation at break is 680%
• Made in two colors: black and white;
• Made in accordance with all standards;
• According to data from Yandex Market, the price varies from 350 to 9313 rubles.

• Short shelf life - 1 year;
• Some models are very expensive.

Conclusion

Based on the above data, we can conclude that this list of the best sealants was created based on the opinion of the user who purchased them for use in an individual range of tasks, where the pros or cons of the material were more pronounced. However, the funds presented are not the only ones to which you should pay attention. It all depends on the level and focus of the work carried out, as well as on what result the user wants to get in the end and how long he expects the service.