Ranking of the best excavator crushing buckets for 2020

In the modern world, it is much easier to carry out construction work, especially when it comes to processing building materials. Now a person can breathe freely, because a crushing bucket will come to replace him, which in a matter of minutes will cope with the task at hand, save time and money.

Purpose of crushing buckets

The development of a city always requires a lot of free territory. However, given the size of the old buildings, which take up a lot of space for new buildings, it becomes problematic to provide a sufficient amount of land. Demolition and dismantling of old buildings is considered the only viable solution, but what equipment should be used for this? Taking into account the degree of activity of reconstruction of old buildings, it is worth using the most effective methods that will ensure the maximum speed of cleaning and removal of construction waste. In this case, the most functional tool is the crusher bucket.

The main purpose of the crushing bucket is crushing hard materials: concrete, brick, asphalt, granite and other building elements.

This method can be called economical, because the crushing procedure can take place directly at the construction site, so there is no need to spend extra funds for the removal and subsequent processing of materials. The advantages of crushing buckets include high productivity with minimal operating costs.

Design features of crushing buckets

The design of the described buckets in many ways resembles the device of an auger crusher, due to which the equipment is capable of working with similar types of soil in the same way as stationary grinding units of large dimensions. The excavator hydraulic system is responsible for the movement of the crushing mechanism, which is installed on special carriers. This equipment is designed for construction machines weighing at least 8 tons. It is also imperative that a reverse and forward flow hydraulic system of the lubricating fluid be present.

The installation on the carrier is carried out in the same way as the installation of a hydraulic hammer or similar impactor. The procedure for crushing solids is carried out by the action of a rotary or jaw element. The variety of mechanisms depends on the model of the crushing bucket. The principle of crushing is quite simple - the upper part of the bucket makes translational movements, while the lower part remains stationary. Solids fall on the static surface of the bucket, after which the rotor mechanism crushes the lying materials.

If the jaw or rotor is worn out, the rotating elements can be easily replaced thanks to the simple bucket design. On modern models of crushing buckets, the outlet diameter can be adjusted using special covers. As a result, materials of various sizes can be obtained. As a rule, the average diameter of the finished waste is 20-120 mm.

In more advanced buckets, an auxiliary tool is provided that is responsible for sorting reinforced concrete waste and other metallic materials. The essence of the process lies in the fact that a powerful magnet is installed in the lower part of the bucket, which determines the presence of iron reinforcement, solid metal plates and other structures.

The advantages of crushing buckets

Undoubtedly, crushing buckets have many advantages over other crushing plants. For the most part, all the advantages are manifested from the economic side. What are the advantages:

• There is no need to use additional mechanical means for crushing materials;
• Maintenance personnel can be minimized;
• There is no point in purchasing stationary crushing plants or automated crushing lines;
• You can reuse the processed material;
• It is possible to reduce the cost of disposal and removal of construction waste from the working area.

Top manufacturers of crushing plants

A crushing bucket is considered to be a rather complex equipment, since it takes a lot of money and time to manufacture such mechanisms. Due to the laboriousness of the process, not so many organizations are involved in the production of grinding units, which will be discussed.

Delta

South Korean firm Delta Engineering Group is one of the youngest and most promising construction equipment manufacturing organizations. A wide range of heavy attachments includes crushing buckets, hydraulic hammers, crushing plants and a variety of replacement excavator impact devices. A distinctive feature of the company is the use of its own production facilities, meanwhile, Delta representatives regularly release models that were developed in conjunction with other technologically advanced organizations.

Throughout the entire period of its existence, employees of the organization give preference to the high quality of manufactured products. This approach significantly reduces the volume of supplies, but as a result, it has a positive effect on the reputation. Thus, Delta crushing equipment is widespread in the domestic and foreign market. The manufacturer's impact units and hydraulic mechanisms can be found in Africa, North America and the Pacific. Hydraulic hammers and other crushing equipment are designed in such a way that they can be used in any climatic conditions.

MB

The most significant organization in the development, manufacture and sale of impact devices and crushing equipment is the Italian company MB. In addition to the development of crushing buckets with complex rotating rotor motion, the organization's employees specialize in dismantling structures and recycling materials. MB dates back to 2000, when a wide variety of models of crushing equipment for loaders and excavators of any size began to enter the foreign market.

The head office, located in the province of Vicenza, has over 7 branches and logistics centers located around the globe. Professionalism and striving for excellence helps the company to be considered one of the most recognized in the international market. MB has established hundreds of authorized service centers and a strong distributor network to ensure that the customer is always supported by technical service.

The crushing bucket range includes a wide variety of options.For example, the smallest device is the MB-C50S2, which is designed for media weighing at least 4 tons. The most massive bucket can be installed on excavators weighing over 70 tons (model MB BF15010)

The most productive and affordable bucket in the price range is the BF 903S3. The model has a long history in this connection, due to the regular updating and strengthening of the design capabilities of the unit. The bucket is designed for 20 ton excavators. Differs in small dimensions, intended for secondary processing of inert substances and building materials of any type. It is widely used during road construction and work involving the installation of pipelines and digging of underground lines.

Ecomeca

Another worthy representative of the production of crushing equipment is the Finnish company Ecomeca. The organization is relatively young and promising; it began its activities in 2011. The company's products are distributed primarily in the European market. Ecomeca crushing buckets are ideal for crushing all types of construction waste.

Most models are equipped with auxiliary augers, so that the waste is ground into sand. This approach ensures that the backfill material is reused for the construction site. The largest options easily cope with both demolition and processing of reinforced concrete structures. Ecomeca impact and crushing plants are quite expensive, but this is justified by the reliability and durability of the equipment.

Allu

The last popular manufacturer of crushing buckets on this list is another Finnish company, Allu. The manufacturer specializes in the manufacture of equipment necessary for the processing and processing of all types of building materials. Our own research center allows you to regularly improve the design features of devices, thereby bringing more opportunities to the disposal of construction waste.

The organization is recognized practically all over the world, and the sales network covers over 40 countries, including America, China, France, Russia, Germany and Sweden. There is also a special subsidiary Allu Stamix, which is responsible for the development of stabilization systems for mechanisms. Allu products are distinguished by reasonable cost and decent quality. It can be concluded that this is a striking representative of the best value for money.

Ranking of the best crushing buckets for 2020

The following is a list of the best models of crusher buckets that can be purchased in the Russian Federation. The list includes devices with the best value for money.

CM CBF

This crushing unit is made for crushing building materials directly in the working area. The range includes 6 different variations of the device, which are suitable for excavators with a weight of 5-50 tons. The ideal recycling mechanism enables waste shredding, processing and recycling at the construction site. In addition to grinding, the described buckets are capable of demolishing industrial buildings, living quarters, railways, pipelines and roadways without any problems. If the construction site has a CM CBF crushing bucket, then the complex process of disposal and waste removal can be avoided, because the unit can cope even with a reinforced concrete structure.

Crushing buckets of this line have small dimensions, which makes them convenient to use even in hard-to-reach places - city streets, small building sites, sewage areas, etc. Equipment transportation is also simplified due to the compactness and low weight of the bucket (7 tons).

With this crushing equipment, it is easy to carry out earthworks, since the special design allows you to instantly process the soil and leave it at the site of work in a crushed form.This approach significantly saves the financial costs of hiring a crew to maintain a construction machine. Another advantage is economical fuel consumption and environmental friendliness of the unit. During operation, CM CBF buckets create minimal levels of air pollution and noise, so during use the unit will not cause disturbance to residents of populated streets. The cost of the construction unit - from 1,900,000 rubles

• Small dimensions;
• Easy transportation;
• Low cost;
• Equipment profitability.

• The complexity of the processing of reinforced concrete materials.

CB2000

The crushing bucket of the frontal-rotor type is designed for crushing building materials and soil directly in the very area of ​​creating buildings with subsequent use in the process. The unit is distinguished by good maneuverability and compactness, so there should be no problems with transportation in urban conditions.

The simple bucket design allows for instant loading of construction waste and unloading of shredded material that can be reused for construction projects. The front-mounted rotor easily handles reinforced concrete structures, bricks, tiles, glass, concrete, natural materials and asphalt pavement. Thanks to the robust coupling points, the crushing mechanism functions fully even in the presence of damp soil or wood. The bucket comes with a set of cutting elements, when changing them, the degree of waste crushing can be adjusted - 0.3 ... 100 mm. The cost of a crushing bucket: from 1,500,000 rubles.

• Bucket maneuverability;
• The ability to process any materials;
• Low cost.

• Low performance considering wet soil.

BF 80.3

This crusher bucket is designed for use on construction machines weighing more than 18 tons. The processing tool is compact and has a long service life. Easily handles crushing and processing of soil, as well as solid construction waste. It is widely used in earthworks, road construction and pipeline laying.

The main advantage is that, despite its small size and light weight, the crushing bucket provides a high processing capacity of soil - 35 cubic meters per hour. Due to these indicators, the grinding tool is regularly used in mines and various quarries for the extraction of minerals. The bucket is designed for quick removal and replacement of the lower section. The cost of the crushing unit is 2,900,000 rubles.

• High performance of the units;
• Multifunctionality;
• High degree of grinding;
• Designed for heavy vehicles.

• High price.

MB L200

The only crushing bucket in this rating, which is designed to work on small excavators and construction machines (6-10 tons). The element is distinguished by its high productivity, processing efficiency and durability of rotating mechanisms. The buckets are ideal for all construction tasks - demolition, recyclability, recycling and reuse, road construction, excavation and pipe-laying.

Like many advanced models, the MB L200 features a quick-release bottom design, allowing parts to be replaced directly on site. The rotor mechanism provides good performance during soil crushing - 27 cubic meters per hour. After the procedure, the final material can be reused as a pad cover. The price of the grinding device starts at 1,700,000 rubles.

• Low cost;
• Internal knot strength;
• Equipment efficiency.

• Not found.

Output

After reading the information in this article, you can get the necessary information about the principle of operation and the best models of crushing buckets.The selection of grinding equipment should be approached responsibly, because the productivity of processing building materials depends on it. It is worth remembering that this rating is not of an advertising nature and is compiled for informational purposes only. Before buying construction equipment, be sure to consult with a specialist.