Rating of the best motion sensors to turn on the lights in 2020

As is known from open sources, the savings in electrical energy using motion sensors to turn on the light is very significant, from 30 to 60%. So it is profitable and expedient to integrate devices with motion sensors into the lighting system. Next, we will consider what sensors are, what kind of knowledge you need to have in order to choose the most optimal and reliable, and which models are the most popular and purchased.

Description of the action of motion sensors to turn on the light

Automatic control systems for indoor and / or outdoor lighting are a specific solution to many complex and urgent problems. For example, the lowest consumption of electrical energy, a significant reduction in the cost of electric charge of the batteries of autonomous presence detectors, a decrease in the operating time of lighting equipment, thereby extending their service life and many other important tasks.

The sensor equipment is directly mounted in the general lighting system, and when an object that moves, the motion recorder sends a signal to the lighting equipment. The light turns off after a while, in most models it is adjusted after the movement has completely stopped. Based on the extensive range of equipment characteristics, you can easily select the necessary presence recorder that will meet all the requirements and desires of the buyer.

Classification of motion sensors to turn on the light

Before purchasing a motion detection device, you should understand and understand what functions it will perform. Therefore, there is a vast variety of different types and types of sensory equipment.

The very first and most important difference between motion detectors is which wavelength spectrum it uses:

• Infrared. These models of motion detection devices detect heat radiation from an object. The disadvantage is false alarms for animal movements and hot air flows, for example, from an air conditioner. The infrared wave spectrum is absolutely safe for human health.
• Ultrasonic. The presence detector works in the range of 20-60 kHz. The device generates a sound wave, which is reflected from the object, is recorded and analyzed by the device. The disadvantages of such models are the possibility of the detector failing due to the fact that the object is moving too slowly, the use of a short range, and the possibility of scaring away pets by ultrasound is not excluded.
• Microwave. The principle of operation of such a detector is to use an electromagnetic wave of high frequency, 1 GHz. The device is produced in a significantly small overall dimensions, which allows it to be installed secretly.The radius and range of operation of such devices depends on the power of the microwave transmitter and the sensitivity of the receiving module of the detector. Environmental conditions and the presence of small obstacles and partitions do not have a special effect on the operation of the motion detector. But such microwave devices are quite expensive.
• Combined. The detectors combine infrared and ultrasonic wave spectra.

The second division of the presence detectors is where the device will be installed:

• Outside the building. The operating radius of such equipment is in the range from 100 to 500 m. Basically, they are mounted on large areas of industrial enterprises or just in the courtyard of a private, country house.
• Inside the building. Installation is carried out in any room, room of a house, apartment and others. The use of such a recorder is carried out using a short range, the value of which depends on the area of ​​the room.

The third division of motion detection devices occurs according to the methods of installation and installation of equipment:

• Wall or corner. From the name it is clear that such a sensor is mounted on a wall or in the corner of walls and ceilings. Such a device is equipped with a small viewing angle, which also avoids false alarms of the sensor.
• Ceiling. Ceiling mountable with 360 degree detection angle. It is very convenient to use such presence recorders to turn on lighting devices in rooms with several doors.

And the fourth division of sensor equipment - according to the way the detector is supplied with electrical energy:

• Wired. It is a very reliable power supply, which allows to ensure uninterrupted and trouble-free operation of the motion recorder. The disadvantage of this method of power supply is that it is necessary to stretch meters of wire and look for a free outlet.
• Autonomous. The motion sensor is powered by one or more batteries, which are mainly inserted into the body of the device. There are also models of motion detection equipment on the market that are powered by solar batteries. The disadvantage of such models is the constant monitoring of the consumed current, which can change its values ​​and values ​​over time.

And these are only the main division groups of this type of equipment, since it is very diverse.

How to accurately select a motion sensor to turn on the light

There are a number of specific criteria for choosing equipment for recording movement:

1. Installation site. If the sensor is installed outside the room, then the IP protection degree of the device should be from 55, the best option is IP 65. But if there is a canopy-type protective device against precipitation above the equipment, then IP 44 can be used. Operation of the lighting switching device when moving an object in a closed room such as a house, a summer residence, a garage and the like is possible with lower protection ratings.
2. Impossibility of signal passage. Due to the different types and types of sensors, there are different possibilities for obstructing the sensor signal. For example, when operating infrared recorders, there should be no obstacles in front of them; when using acoustic ones, there should be no extraneous sounds and noises. But when using microwave and combined types of sensor-converting equipment, practically no external factors influence the signal quality. Therefore, I install them in large warehouses, garages, emergency warning and alarm systems.
3. Viewing angle. If the room has several doorways, it is better to use a motion sensor with a 360 degree detection angle.If the room is equipped with one entrance or is a walk-through, then, for example, a detector with a 180-degree view can be used, which will be directed towards the possible appearance of a person.
4. Lighting system power. The power of the motion detection device directly depends on the power consumption of the lighting devices. The power value should be slightly higher than the power value of the lighting system.
5. Radius of action. The effectiveness of the motion detection device to activate the lighting system is directly proportional to the distance of its action. Basically, the radius of the sensor's response ranges from 6-50 m. This parameter undoubtedly depends on where it is used. If in a confined space, then you can use a sensor with a minimum range. But in order to turn on lighting equipment outside a building or structure, a larger area of ​​motion detection is required.
6. Photo relay. This is an add-on module supplied with some sensor models. The photo relay is a light detector. The principle of operation is that if the illumination parameter is lower than the photo relay settings, then the light turns on, and if it is higher, then the light remains off. The presence of this element allows you to significantly save energy.
7. Lack of ability to detect animals. The parameter of motion sensors, which also needs to be paid attention to. This function of the device allows you to avoid provoking the sensor to trigger due to the movement of various animals, which will save money for light.

The above selection criteria should help to correctly select the optimal and appropriate motion recorders designed to activate lighting equipment.

Best motion sensors to turn on lights in 2020

Below is a ranking of the best and most popular touch equipment.

10 - Navigator 71 967 NS-IRM05-WH

The tenth place in the rating is the infrared detector of light switching on by registering the presence of a person Navigator 71 967 NS-IRM05-WH. This device detects, records and analyzes the heat flow that occurs when an object is moving. The device can be used with any type of lighting equipment. Has the option of adjusting the light threshold for turning on and off the lighting system. It is also possible to adjust the response time of the sensor to disconnect from 10 sec to 7 min. The detector's operating range is 12 m, which is provided by the sensor head with a 180-degree viewing radius. It is recommended to install the recorder at a height of 1.8-2.5 m.

• A large number of sensors in a box - 50 pcs.;
• Good value for money;
• Wide operating temperature range - from -25 to +45 degrees.

• Not found.

9 - Camelion LX-39 / Wh

In ninth place is the wall-mounted sensor for turning on the lighting when it detects the presence of a person outside the house or apartment, Camelion LX-39 / Wh, whose not unimportant function is to save electrical energy, thereby saving money. The device is built into the system of lighting equipment, turns on this system by registering and analyzing the movement of the heat flow. Buyers recommend using such a model of a sensor device in adjoining territories, in entrances and elevators. It is possible to set a delay for turning off the lighting system from 5 seconds to 9 minutes. The 180 degree viewing angle of the sensor head allows you to detect an object at a distance of 12 m.

• Maximum connected load 1200 W;
• Easy to attach to any wall surface;
• The illumination of the sensor is 2000 lux.

• The detector installation height is not more than 3.5 m.

8 - REV Ritter DD-4 Control Luchs 180

In eighth place is the motion sensor for controlling the lighting system REV Ritter DD-4 Control Luchs 180. This device is very thin, which allows it to be conveniently mounted on the wall of a corridor or wall. The angle of detection and registration of movement is optimal, 180 degrees, which provides a distance of the sensor head of 12 m.The maximum power of the connected devices should not exceed 1200 W. The degree of protection of the equipment against moisture and dust is IP 20. The recorder is powered by a general network 220 V, 50 Hz. The electronics are equipped with an automatic shutdown system that can be set in a time range from 10 sec to 7 min.

• Very handy for lighting long corridors;
• The package includes 10 presence recorders;
• Modern design.

• Not found.

7 - Bradex "Mighty Light" TD 0355

On the seventh place in the list of the best sensors for turning on light - Bradex "Mighty Light" TD 0355. It is a worthy device for providing light to a house or apartment, without using meters of wire. There is no on / off button on the body of the device. It turns on automatically when an object is detected and turns off after 25-30 seconds if there is no movement. During daylight hours, the device is turned off, but after dark it turns on automatically. The equipment is powered by one 9V 6F22 battery. Two LED bulbs are already inserted into the body of the luminaire, which illuminate the room.

• Autonomous power supply;
• Fastened to the wall both with a screw and adhesive tape;
• Excellent energy savings.

• Insufficient lighting.

6 - Eglo Detect Me 1 96452

In sixth place is the Austrian sensor device equipped with a presence detector, Eglo Detect Me 1 96452, designed to illuminate the area outside buildings and structures. It is a lighting fixture with an incandescent bulb, which is supplied with the fixture. The device has a degree of protection against dust and moisture IP 44. Has overall dimensions: length 55 mm, height 70 mm. The weight of the sensor equipment itself is quite small, about 0.13 kg. The device is powered from a network of the European standard 220 V. It is produced and manufactured from high quality white plastic.

• European quality product;
• Easy installation on the wall of a building, structure, structure;
• Perfectly illuminates the area at the entrance to the house.

• Great value.

5 - Camelion LX-451

In fifth place in the ranking is the Chinese infrared motion detector Camelion LX-451. Such a device is designed to automatically activate and deactivate the lighting system, which has contacts in the form of a standard base that can be screwed into a regular bulb holder. The lamp itself is inserted into the body of the night lamp, which provides lighting in a dark room. The device has the ability to program it for automatic shutdown at regular intervals, from 5 seconds to 8 minutes. The recommended and declared by the manufacturer installation height is 3 m. The color of the device body is white.

• Good working radius indoors;
• Long service life of the sensor in the form of a cartridge;
• Excellent energy savings.

• Insufficient quality plastic of the case.

4 - Navigator 61 653 NS-IRM09-WH

In fourth place is the Navigator 61 653 NS-IRM09-WH infrared intelligent motion sensor, which is used to automatically turn on and off lighting devices in a room or room. The sensor device is equipped with an additional function in the form of lighting control, adjusting the sensitivity of the sensor head to the infrared spectrum of radiation by an object, and a time delay for automatic deactivation of light. Due to the fact that the device is connected and powered from a common 220 V electrical network, the motion detection device will last a long time.

• Quite easy and convenient installation and configuration of the recorder;
• There is a possibility of concealed installation (under plaster);
• Large operating temperature range - from -25 to +45 degrees.

• Small radius of action.

3 - Camelion LX-20B

In third place in terms of popularity and the number of purchases is the Camelion LX-20B ceiling device with a motion sensor, designed to provide light for an apartment or house. The lighting fixture is controlled by the presence factor and the level of natural light. The sensor built into the floodlight is equipped with a 360-degree viewing angle and a 6 m radius of action. The sensor equipment is powered from a common 220 V. It has an automatic shutdown system for the light system, which can be set and set different time values, from 5 seconds to 8 minutes. ... It has a modern design and comes in white.

• Maximum load power 1200 W;
• Installation and mounting height 2.6 m;
• Setting the off time for the lighting fixture.

• Short working distance.

2 - Navigator 71 963 NS-IRM02-WH

In second place is an infrared device with a motion detection sensor Navigator 71 963 NS-IRM02-WH, equipped with a photo relay, which periodically analyzes the level of illumination in the room. Mainly used in rooms, basements and staircases. Inexpensive and small, the device can be easily and easily mounted to the ceiling. It is powered directly from a common 220V network. The detector is triggered if the illumination level is less than a certain threshold, it turns off if it is greater than the threshold. The device is equipped with systems for setting the time of automatic light off, sensor sensitivity, light threshold level.

• Number of copies in a set 50 pcs.;
• 360 degree detection angle;
• Ease and convenience of installation.

• Small radius of registration of presence.

1 - REV Ritter "AKTION" 110

In the first place is the lighting controller for the movement REV Ritter "AKTION" 110. This model of sensor equipment can be easily mounted on a wall or ceiling, like a normal light switch. Entering the entrance or into the territory of private houses, the sensor will instantly detect the movement, thereby activating the lighting devices. Such a device will perfectly save electrical energy, which means your money. There is a system for automatically turning off the light in the absence of movement. So you can safely leave the house or territory without fear of leaving the light on. The detector is supplied in white color.

• Manufactured according to German standards;
• Very light weight;
• Timer programming from 3 sec to 12 min.

• Small radius of action in the local area.

Motion detectors for activating lighting equipment provide financial benefits to the owner at low purchase and installation costs. And this once again speaks of the expediency and pragmatism of the choice and purchase of such sensor equipment, which will significantly save considerable money and volumes of electrical energy. A huge and vast number of types and types of presence registration devices make it possible to provide light to any territory outside buildings and structures and the area of ​​premises of houses and apartments.