Review of the best IDDIS faucets in 2020 - pros and cons

The mixer is an irreplaceable sanitary fixture, without which the comfortable life of a modern person is inconceivable. It serves to supply hot, cold water and to mix them. People always have a choice: to install a mixer from a domestic manufacturer and hope that it does not break in a couple of years, or to give preference to an imported brand, which is a guarantee of quality and will last for many years.

Today we will review the best mixers from IDDIS. Let's highlight the advantages and disadvantages, talk about the features and much more. Let's start with a description of the company to get an idea of ​​the products.

IDDIS

The trademark is not new as it was registered back in 2004. Deals with the development of plumbing at affordable prices for residents of Russia.

In addition, IDDIS produces not only mixers, but also their profile is:

• components for mixers;
• everything for shower heads (racks, hoses, etc.);
• washbasins;
• toilets;
• high quality ceramic sanitary ware;
• accessories;
• shower cabins;
• flush cisterns for toilet bowls.

The products are marked with a quality mark, since they comply not only with Russian, but also with European manufacturing standards.

IDDIS mixers rating

IDDIS Classic 27014E1K

Standard representative of a two-valve mixer from the sanitary ware manufacturer IDDIS. Mainly characterized by simplicity and reliability in use. Suitable for installation with steel baths. The design has two valves - cold and hot water.

The faucet body is made of chrome-plated brass, which is one of the main criteria for durability. Average water consumption - 20 liters per minute with the valves turned out as much as possible. The hose is made of stainless steel.

• reliable design;
• easy to assemble;
• high spout creates a lot of space under the tap;
• acceptable cost of 3,000 rubles;
• control is smooth, without difficulty while turning the valves;
• a large selection of equipment;
• stable clips.

• the hot water handle gets very hot;
• despite the aerator in the design, a rather noisy model;
• no automatic switch to shower;
• the filter needs to be cleaned frequently;
• frequent replacement of gaskets;
• in a wet state, the hands slide strongly along the surface of the handles.

IDDIS Viola VIOSB00I02

Single-lever mixer made of brass. The coating is quite unusual as it violates our usual standards. This metal can easily withstand high temperatures and does not heat up during use. Also able to withstand increased pressure in pipes.

The 1.5 m hose is made of stainless steel. Unlike the previous model, the built-in aerator is equipped with a mesh for quiet operation.

It is operated very simply, it is easy enough to touch it and turn the lever in any direction you need. The elegant shapes allow you to enjoy the mixer every time you use it.

• modern design;
• comfortable in using;
• does not heat up;
• withstands high pressure in pipes;
• easily adjustable pressure and water temperature;
• the shower head holder is easily adjustable;
• resistant to corrosion;
• the joystick does not slip out of wet hands.

• not the lowest cost of 8,000 rubles;
• few modes in the watering can;
• the wall holder is inconvenient.

Unfortunately, if such a mixer breaks down, the components are difficult to find in our country.

IDDIS MALSBL2i10

The IDDIS MALSBL2i10 single-handle long spout mixer has a 10-year warranty. The entire structure is made of brass, which only confirms its durability. The laconic design and unusual shape will immediately attract the attention of the buyer.

The mixer kit includes:

• two reflectors;
• brass eccentrics;
• gaskets;
• wall-mounted shower holder;
• watering can;
• hose;
• pouring out;
• mixer.

From the use can be distinguished by one-touch adjustable water temperature and flow force of the spout. The mixer shows good optimization of water flow.

• easy to use;
• 10-year warranty;
• adjustable in one touch;
• convenient shower hose;
• price: 6,000 rubles;
• shower switching mechanism works smoothly

• the mixer takes some time to switch from cold to hot water;
• the shower holder is attached separately.

IDDIS Calipso CALSB00i01

Single lever basin mixer IDDIS Calipso CALSB00i01 made of brass, chrome-plated on top. The standard manufacturer's warranty for mixers is 10 years. The quality and design meet all the requirements of the Russian buyer.

The mixer design was developed by engineers from different continents and countries. Therefore, this model can be called one of the most successful for IDDIS.

The model will last for many years if the aerator mesh is cleaned frequently. This can be done simply by swiping with two fingers. The design allows you to carry out this procedure at any time convenient for you.

• adjustable aerator;
• low cost of the mixer;
• easy to install by yourself;
• service life is increased;
• cost: 5,000 rubles;
• the main material is brass and chrome plating ensure a long service life of the mixer;
• ceramic mechanism;
• specially designed design;
• smooth regulation of water temperature;
• compact size.

• hoses are attached in the depth of the crane;
• high pressure at maximum;
• weak fastening.

IDDIS Alborg K56001C

The IDDIS Alborg K56001C single lever kitchen mixer will bring a sense of reliability to the installed kitchen. This is exactly what the manufacturers of this brand of plumbing are striving for. It, like all other mixers, is made of brass. The top layer, which is a chrome coating, will protect the faucet from corrosion for many years.

The lever switches very softly, does not require additional effort to switch from cold to hot water. If desired, you can install the tap in one convenient position for you, lower it and use the same position for the next use without turning it on different sides.

Ceramic cartridge. Built-in aerator with a special noise suppressing mesh. The equipment is standard, exactly the same as for all other mixers of this type.

• the lever is soft;
• the aerator performs its function perfectly;
• also the aerator is easy to clean;
• spout turns well;
• perfect for deep washing;
• affordable price: 3,500 rubles;
• the set includes a ring for secure attachment;
• long service life;
• stable mount.

• very strong pressure when turned on to maximum;
• short flexible eyeliner.

IDDIS Natal 37102T7 + T12

At the time of release, all modern trends were combined in this mixer. The best engineers of the company took part in the development of design and technical equipment. They tried to convey to the buyer the most daring ideas.

The two-grip mixer meets all the quality requirements of our country and the European Union.The body is made in a classic form of chrome-plated brass. It is unique that it has a thicker layer than other mixers from other manufacturers.

There is no aerator included, but the tap does not need it. The device is designed in such a way that when the maximum water pressure is turned on, the mixer will create a minimum of noise.

• modern design;
• complies with GOST quality and manufacturing standards in the European Union;
• the main material is brass;
• thick chrome finish;
• protection against corrosion;
• 10-year warranty;
• hard type of eyeliner.

• average cost in the market: 7,000 rubles;
• there is no aerator;
• with a weak tightening of the set screws, the crane may dangle;
• there is no bottom valve;
• rather difficult to install.

IDDIS Zodiac ZODSB02i02

Bath faucet, single grip, brass, enlarged nickel-chrome plating, ceramic Softap cartridge, ceramic divertor, Neoperl silicone aerator.

The representative of the Zodiac range is made of high-strength chrome-plated brass. Modern technologies of casting and processing of the base material and increased wall thickness of the outer coating reliably protect the mixer from temperature and pressure drops.

Nickel-chrome plating meets the highest European quality standards, provides corrosion resistance and provides a high-gloss mirror finish. Does not lose its qualities throughout the entire period of service.

The set is standard, it includes:

• watering can;
• stainless steel hose.

The faucet is guaranteed for 10 years, and for the shower head and 1.5 m hose - 5 years.

• made of high strength brass;
• increased chrome plating;
• 10-year warranty;
• the watering can and the hose are guaranteed for 5 years;
• classic design;
• the mixer does not lose its external qualities throughout its entire service life;
• average cost in the market: 4,000 rubles;
• the hose is equipped with a kink protection.

• on the glossy tap, prints and traces of dirt are most noticeable;
• if the fastener is not tightened with sufficient force, the mixer will dangle.

IDDIS AL3PB0Gi05

The mixer is specially designed for kitchen sinks. Despite all its advantages and built-in mechanisms of the latest generation, it is considered one of the cheapest on the market. Its average cost does not exceed 3,000 rubles. Why is it so cheap?

The standard metal of manufacture is brass, and the coating, unlike all other models, is called Granucryl. It is made of granite. It costs a little cheaper than chrome plating, but is in no way inferior to it. In this case, you can choose any color you like for application. Its advantage is its matte finish, which does not show fingerprints and dirt. In addition, such a faucet is much easier to clean.

The built-in aerator with a special noise suppression mesh can be easily cleaned by lightly swiping with two fingers. Also included in the kit:

• flexible eyeliner;
• fasteners;
• plastic spacer for fixing the mixer.

• innovative coating;
• modern design;
• average cost: 3,000 rubles;
• The body material is brass;
• the spout turns easily;
• granite coating:
• no traces of dirt are visible on the matte surface;
• the coating is easy to clean.

• after a few years, the mechanism may start to jam.

IDDIS EDISB00i01

The main body material is chrome-plated brass. Single-lever mixer designed for installation on a sink (washbasin). The horizontal mounting type is considered one of the easiest to install and use.

It is compact in design and has no unnecessary parts. An important feature is the presence of an aerator and a ceramic cartridge. Due to them, the device will last for many years and keep the water clean. There is also a noise suppression function installed in the aerator. Also, the tap does not leak, because it closes tightly.

You can assemble and install one of the plumbing items with your own hands. At the same time, you do not need to have special knowledge in this area.Therefore, the IDDIS EDISB00i01 mixer has received many positive recommendations from customers.

• easy to install;
• made of brass;
• chrome plating;
• horizontal type of installation;
• compact;
• noise suppression function;
• 10-year warranty;
• the tap is not leaking;
• low cost: 4,000 rubles.

• traces are visible on the surface;
• it is necessary to rinse and clean often;
• installed only on the sink.

IDDIS Torr TORSB00i08

One of the best mixers from IDDIS company. The body material, as usual brass, has a thick chrome plating. Because of this, the faucet shines pleasantly. Unfortunately, this has one big drawback - such a mixer will have to be cleaned often, because it will leave fingerprints and dirty stains on it.

The set includes a hygienic shower, which is designed for washing dishes or hands. The shape is pleasant, round, the handle does not slip out of the hands. It greatly simplifies the implementation of all household chores. It is enough to take it in your hands, turn it on and you will get rid of dirt on any surface. No noise at maximum pressure.

Controlled by a lever. There is also a button to switch from one watering mode to another. Very easy to install in the sink. You can install the mixer yourself. The hose is attached separately to the wall.

The design was developed in a modern style in compliance with all the conditions specified by buyers for the mixer. Engineers not only from Russia, but also from Europe took part in the development of the design and technical equipment. It can be said that it also meets the requirements of foreign buyers. A lot of effort and time has been invested to achieve the perfect combination of reliability and practicality. It has a standard 10-year warranty.

Equipped with:

• aerator;
• shower head;
• flexible eyeliner;
• fasteners;
• interlayers;
• wall holder.

• made in a modern style in accordance with the requirements of the residents of Russia and the European Union;
• low price: 5,500 rubles;
• convenient mounts;
• comes with a wall-mounted watering can;
• just turns on and off;
• the water temperature is easily adjustable;
• controlled by one lever;
• basic materials - brass and chrome plating;
• 10-year warranty;
• can be installed by yourself.

• the holder can dangle;
• frequent cleaning of the mixer;
• the watering can has a separate mount;
• high water consumption at maximum inclusion.

Output

To summarize, IDDIS mixers have the following positive components:

1. They are divided into a large number of types according to purpose, design and purpose;
2. Meet all the design requirements of a modern buyer;
3. Compliant with GOST standards in our country and Europe;
4. All faucets have an average market price;
5. The buyer has a choice between matte and glossy finishes;
6. The cartridges are quiet even after 6 years of use.

All of them largely outweigh the negative aspects of mixers from the manufacturer IDDIS. The company has worked its products in such a way that each buyer can find for himself exactly what he was looking for. A wide variety of designs, from classic to modern, matte or glossy finish, an increased layer of chrome and brass, taken as the main element of production, will create a sense of reliability for the buyer.